Hey, look at my posts only one and I have all the parallel wiring there. I just wired 6 boards using parallel and have a 5 port wagos for the parallel function to not worry about the dreaded thermal runaway. You can place quick blow fuses right before the board so if something does fail it will shut...

M3 Screws https://www.amazon.com/Socket-Stainless-Assortment-Beauty-Star/dp/B071JDDQ3H/ref=asc_df_B071JDDQ3H/?tag=hyprod-20&linkCode=df0&hvadid=198079933338&hvpos=1o2&hvnetw=g&hvrand=1603109467850331419&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032003&hvtargid=pla-373908117554&psc...

Bro four boards would be fine enough. Anything holding light at the width of 4ft is cramped its not like you have a 5x5 for wiggle room. I am running 6 boards in my 4x4 and that is plenty of light to leave EVERYTHING covered with light! I started off with 4 and that was fine, but I was thinking if I...

PS: That was and is my FIRST build. Took 20mins

I am running something veeeery similar to what you have and was worried about wiring in parallel. I have 3 QB288 V2 boards on one heat sink and another three the same way all wired in parallel using a 5 port wagos to help with the worry of thermal runaway. I also will put some fuses on it later but ...

BLESSINGS!!!

:o thank you! This morning was a sigh of relief when I saw your post. Now let's talk my driver.. since I have the 320h-54b it seems that is only enough to power 3 boards strictly in parallel and nothing else. The C 2100B could power more than three boards and do BOTH series and parallel or only seri...

Hello Folks, I am at odds with my brain right now and how things should and could work. My current setup is 3 QB-288 V2 Quantum Boards with an 1 Mean Well HLG-320H-54B (with Dimmer Knob). Should these boards be fine running parallel? I always hear be careful with parallel wired equipment. With the a...