Yeah i am

Well ill figure this out some how .
Thanks yall

I could go that route but then at the added cost of everything . I feel it will be much easier to build regular cob fixtures. It will almost be in the same $$$ . I was really tryna say building this fixture was the best bang for my buck and it seems like its not lol

If possible . I was thinking like this .
Each driver having its own power source .

Now the question is will the wiring allow this .

This is how i planned to do it . Just integrate the quick disconnects to the middle fixture .

Gotcha... because they are a bit cheaper then the others . I dont understand why its classfied "lt-lm561c g2" fake advertisement lol .. regardless im using that one for the reason of cost and so on . And i was thinking 3 fixtures with quick disconnects or some sort of plug to complete the circuit . ...

So i did this basic math. Two cv drivers hlg 480 24a Would be needed to power them . Enough juice to pump about 800 plus or minus to the strips if wired in parallel. I was planning to use these strips https://www.digikey.com/product-detail/en/samsung-semiconductor-inc/SI-B8T172560WW/1510-1336-ND/595...

can i get some info on how to work with a constant voltage driver ?
how is the math worked around that ?

Much love too yall. Ima study whats posted and write it down to further under stand it . i understood most of it which is better then i started .

Ill do some math and designs and keep yall updated

Its very tricky.. i got lost so many times lol.
So yes essentially one large rectangle 6x3 and a small square 3x3 . The tables are hydrofarm low pro tables.
. Ill post a diagram of some what how i planned to start the design.