You're welcome. That should work OK... Almost any Dimmable Driver that has an adequate Output Voltage Range and Adequate Wattage output can work in your application... Just successfully tested a single (1) Bridgelux BXEB-L0560Z LED Strip with Dimmed 75 Watt , 8 - 25 Vdc LED Driver @ 140 mA (min) to...

You're welcome. 1. You could run a single strip on a Dimmed HLG-40H-24B Driver (-24AB would be better) , which has a CC region of 14.4 - 24 Vdc and can be dimmed down to ~ 15% - 35% (100K Ohm External Pot @ 15K - 35K Ohm) HLG-40H-24B LED Driver @ Digikey... https://www.digikey.com/en/products/detai...

Is it safe to run single strip (eb gen2) on HLG-60H-C350? Driver CONSTANT CURRENT REGION: 100v-200v Current adj: 210 -350. Probably Not safe for LED Driver, if the Strip is 20 Vf... But, you could run a single strip on a Dimmed HLG-60H-24AB (or -B) Driver , which has a CC region of 14.4 - 24 Vdc an...

OK,
I watched ledgardener video :

And seems like it's not recommended..

Hi beautiful ppl,
Is it safe to run single strip (eb gen2) on HLG-60H-C350?
Driver CONSTANT CURRENT REGION: 100v-200v
Current adj: 210 -350.

Thanks

Thanks guys, So I've order hlg-120h-24a, arrow don't have the 20v in stock, The volt adj on this driver is 22-27v, the volt region is 12-24v, this driver is a 5A and the amp adj is 2.5-5A. On a 10 strips, will I be able to run it on 350ma if want to, even tho this is a 24v? or it will always run on ...

Thank you very much @The_Mouse_Police
Can you please check out this thread,
Comment #3, can you understand my confusion?

Hi wonderful ppl :), I'm kinda confused about eb gen2 series wiring: With the help of this forum I made my first build , used it for 2 grow cycles and was happy with it, and with results. My build: HLG-60H-C350A 10x BXEB-L0280Z-35E1000-C-B3 (added 2 more, from 8 to 10) In series wiring, so about 200...

Thanks

Hi, I'm running small fixture of eb gen2 280mm, thanks to the help of this forum :) I've got a small space and I'm happy with the results. 9 eb gen2 28mm HLG-60H-C350A I've got room (and power) to one more strip, I've been reading here about red 660nm. Should I add one 660nm strip to my fixture, or ...