Can I make a suggestion? Run them soft, and buy a couple of extra strips.. its totally worth it. They won't run as hot, which means you don't need any heatsinks. I have two fixtures, I run my first @1050ma and the other @715ma, and tbh, I wish I went with 715ma from the start. If you do the math and...

Okay, as you see they're working spectacular! Well, except for 14 diodes on one strip, that never lit.. kinda weird since I thought they were soldered in series. Guess they're not, :lol: Both my hydro-grown and my organically grown are absolutely LOVING these lights. Thinking about adding some repti...

Sooo, thought I'd update y'all on my progress :) the rig is finally built, been for a month or so. I had some help from my brother in law and a friend of his. We built the frame out of aluminium L-bars, 20x20x1,5mm. Had some T-bars as well to reinforce the structure, turned out perfect. Popriveted t...

Hello guys! Thanks again for all the replies folks! I have a pretty clear picture of what I'm going to set up. Thing is, none of the parts are available: And I've been looking everywhere; Digikey, Arrow and so on. Restock at Digikey is expected around 11/11/19 for the AB-driver and 17/12/19 for the ...

Thanks for all the input guys! Looks like I'll be getting that AB driver then, or I'll definitely consider it thats for sure :D i just have trouble understanding what potentiometer im supposed to pick: I know im supposed to get a 100k ohm, since im only using one driver to dim, that much I've figure...

Hello again! Sorry for reposting in this old thread, but i need to ask; would it be possible to replace the B-model driver with an A-model? That is, replacing the HLG-600H-42B with a HLG-600H-42A! I'm thinking the A-model is a little cheaper and it's dimmable down to 50% without an external dimmer, ...

Welcome. The strips run at ~40V so. 40V x .7a = 28watts 600w ÷ 28 watts per strip = 21.5 strips So 21 or 22 would be the answer, whichever suits your layout better. Very pleased with the 3500k EB gen II's personally Thank you! :D So i can use the same driver as the example i provided? The HLG-600h-...

Hello there folks. Im looking to do a build with EB-Strips; BXEB-L1120Z-35E4000-C-B3, @700ma with no heatsinks sorta' like this guy did for my 4x4 tent ----> https://ledgardener.com/forum/viewtopic.php?t=1098 BUT i want to run EB-strips instead, that is. Thing is im not sure what driver i would need...