Search found 53 matches
- Tue May 03, 2022 4:04 pm
- Forum: Boards
- Topic: Dimming Multiple HLG-240H-48B Drivers with single dimmer
- Replies: 2
- Views: 5669
Re: Dimming Multiple HLG-240H-48B Drivers with single dimmer
Page 4-6 of the data sheet... https://www.meanwell.com/Upload/PDF/HLG-240H/HLG-240H-SPEC.PDF Graph on the bottom of page 4 showing resistance/N for various dimming levels. 100/N being 100% output. N=number of drivers. This is the standard protocol for all meanwell HLG drivers. 100k ohms/5drivers= 20...
- Wed Apr 20, 2022 6:11 pm
- Forum: Strips
- Topic: 2x Growcraft ledbars .
- Replies: 1
- Views: 1387
Re: 2x Growcraft ledbars .
[*]Hello , i am new here but follow ledgardener his youtube channel all ready a while . I bought 2 led bars of chill led the 40 inch , now they tell me that the max is 3500mA by 46v . When i ask for the best mean well driver for the bars in series they tell me 1750mA because in series you have to d...
- Tue Apr 19, 2022 2:40 pm
- Forum: Strips
- Topic: Help identifying strips
- Replies: 13
- Views: 3469
Re: Help identifying strips
Yes appears that way. You don't "need" the 660 to flower/.BigButters wrote: ↑Sat Apr 16, 2022 3:26 amSo can I just hook up the 320w driver to the 4 strips in parallel? I just wouldn't have the 660nm?
There are only a few 660nm diodes in those strips? Would i still be able to flower or just use them for veg?
Thanks
- Tue Mar 29, 2022 6:39 pm
- Forum: Strips
- Topic: Kind Xl1000 Drivers
- Replies: 3
- Views: 1548
- Tue Mar 29, 2022 4:50 pm
- Forum: Strips
- Topic: Kind Xl1000 Drivers
- Replies: 3
- Views: 1548
Re: Kind Xl1000 Drivers
A strip with the Vf of 36-42v and can run at 1200ma.
- Thu Mar 24, 2022 2:32 pm
- Forum: Strips
- Topic: Are these Samsung strips worth getting?
- Replies: 5
- Views: 3296
Re: Are these Samsung strips worth getting?
Those strips are Samsung "H inFlux" strips. They have been being made by samsung for years now. Thy are not old...they are continually produced to this day. The Hinflux are the only ones with conformal coating and 301's so will be the most resilient/robust strips on the market. They use 301B diodes....
- Mon Mar 14, 2022 4:48 am
- Forum: Strips
- Topic: Help identifying strips
- Replies: 13
- Views: 3469
Re: Help identifying strips
I took apart the output current control box. It has 3 potentiometers. 3000k. 660nm. 6500k. Is the 3000k and 6500k, the 320w drivers? The 120w to the 660nm? Can I just put a 3prong plug to one 320w driver w/pot. And wire that to 4 strips. Then test that? Not trying to burn the place down. Thanks Yep...
- Fri Mar 11, 2022 4:03 pm
- Forum: Strips
- Topic: Help identifying strips
- Replies: 13
- Views: 3469
Re: Help identifying strips
320=cool white and has 2 wires 320=warm white and has 2 wires 150w = reds and has 2 wires. Not quite sure why they are going into a box and what "microcode" is. Shouldn't need any distribution boards, but maybe if they are parallel they took the extra step. The boards are 3 channels....hence the 6 o...
- Wed Mar 09, 2022 5:06 pm
- Forum: Strips
- Topic: Meanwell Driver
- Replies: 1
- Views: 1472
Re: Meanwell Driver
Ground wire is the green...goes to round prong in center of the plug
Other two wires are both hot/live wires if wiring to 240Vac. ...go to the flat prongs on each side of the ground prong.
Other two wires are both hot/live wires if wiring to 240Vac. ...go to the flat prongs on each side of the ground prong.
- Sun Feb 06, 2022 4:14 pm
- Forum: Boards
- Topic: liquid cooled
- Replies: 2
- Views: 1328
Re: liquid cooled
look at Agnetix for a commercial example.
Used to be a dude who cooled COBs on aluminum square tubing with custom end caps but never followed up.
Used to be a dude who cooled COBs on aluminum square tubing with custom end caps but never followed up.