Haven't seen any posts on the below strips

https://www.digikey.co.za/product-detai ... ND/7693230

have you tested these out?

Hi All,

i have 20 x 2ft 3500k strips and a HLG-320H-42A driver. How would i wire this to get close to the maximum wattage?

Thanks in advance

Man i really thought I could build my light with those drivers. I will have a look at the xlg range. I’ve already built a light using 12 X Gen 2 560mm strips and a meanwell HLG-240-20A driver and it runs super cool. But it’s roughly the same price as the kingbrite 240watt Quantum Boards

Hi, could anyone tell me how many 560mm Bridgelux Gen 2 strips I can run with this driver to get close to the driver max output

https://www.digikey.com/product-detail/ ... ND/5597295

Hi, Would the below build work with one cob on one driver? [li]https://www.digikey.co.za/product-detail/en/thomas-research-products/PLED96W-069-C1400-D-HV/1121-1396-ND/5597300[/li] [li]https://www.digikey.co.za/product-detail/en/luminus-devices-inc/CXM-22-35-90-54-AC40-F5-3/1214-1627-ND/9839301[/li]

Thanks for the replies. I was using the strip build plan from the main website here. Does the “A” and “B” versions of the HLG driver differ in terms of voltage? Will I be able to dim the lights with the built in potentiometer or does it have to stay on full power so the voltage won’t drop?

Hi, I need some confirmation on my parts list for my EB Gen 2 strip build for a 2x4 tent. Would any of the experts on the forum please see if the below parts checks out.

12 X 560mm 3000k EB Gen 2 Strips
1 x hlg-240h-20a

Thanks in advance

My budget is about $100 for driver and lights. The aluminum and other bits I get for free. 12x2ft strips is about $58 xlg-200-24a is $40 to which is on budget. What would you do with that budget in a 6.5ft2 space?

Could I add some supplementary red leds to my build on the same driver? And how many EB strips would be good for the xlg-200-24a

Would the xlg-200-24a with a 8.3a run 8 2ft EB strips?