Ok! here my setup 24 eb 280 1st gen split into two channels on two hlg185h 24a. whats more efficient 12 on 1 driver dimmed. or 24 on 1 on full tilt?

Is this a good idea? 3M 4010. We use at my job, Its permanent.

I'm sorry I see the wagos now. Do you know the part number?

Thanks for the diagram, it's just what I needed. So just dim to about 75% which I think will give each strip 650ma? Also if I were to use wagon which part number and how would I connect them? Thanks again, you da man!

Hi guys and girls! I've been researching awhile and pulled the trigger on a diy eb strip build that's still in progress. Constructive criticism welcome and I would really appreciate some input on how I should wire the light. The setup: 39.5"x 22" wood armoire painted gloss white (it was free), 1 wat...

that sounds good, thanks for the input.

Those pics are not mine, i was using those as examples. The first pic i found while researching east west configs, his build was for an aquarium! they are eb strips though, http://www.plantedtank.net/forums/20-diy/731121-led-build-465-watts-bridgelux-eb-strip-leds-prev-vero18-%2Aupdated-2017-01-18%2...

How many 280mm eb strips ran at what wattage covering 6sq/ft would average around 1000 ppfd?

I guess what I'm asking is would my coverage be better in my rectangular space if I ran the 11in strips across the 24in depth or run 3 11in strips (33in) on one 36in heatsink across the 36in width.

OK, got it. One more thing I'm running 22 1ft strips in a 3x2. Which configuration would be better for optimum coverage ? Running 3 strips on (8) 36" heatsinks the width of the cab or just 22 strips configured like yours? I ask because the 1 ft strips configured like yours won't cover the 2 ft depth...