The 4th board will be on its own. I have a 60w driver for it.

Was looking for help on which driver I should run the 3 of them on if I want to push them to 70 watts each.

Last, should I get a A or B driver if I am going to wire the bayite readout in the setup.

What 240 driver would I want to I use?

hlg-240h-36 or hlg-240-1750

Basically should I wire in a series or parallel..??

With the bay tech unit I want to get should I get a or b driver ??

I am going to run the last board separate on it’s on driver. I got a hlg 65 in a trade and this last 132 on a 60w driver will help it out. I was using a HPS because of my climate but it’s not going to fly now I have 2x2x4 that hlg 65 n 1, 132 will go into. A 2x4x6 that has a qb96 on its own 185w dri...

I want to run 3 with the 240 driver. I’m going to run the 36v like they suggest on their site. Is anyone running them nearly maxed out at 75w ea?? I want to buy a 240 driver so I’m not pushing it all the way to get 210/220 total watts. But a aluminum frame with something like this mounted - https://...

Hello all

It’s been a bit for me here. I have a few tents in the garage, I bought a 4pk of the 132s when the v2s sold out

I want to run 3 with 1 qb96 in a 2x4

Any driver advice?? 240 or 185??

just pick up a https://horticulturelightinggroup.com/collections/diy/products/135w-led-board-kit panel, going to add it to my 3.8ft x 2.8ft space with my vented hood 400hps. Went with the 4k, the hps bulb i have is 2100k. excited to see what a mix of light will do to my 5 girls. i plan to upgrade so...

which cob's does everyone believe to run the coolest..?? cree 3590..?

since i began my closet venture has grown and expanded. Ive bought all sorts of electric timers, controllers for just a temp, etc.

all in all, is just a bunch of shit product from china. I operate on mechanical timers now and things are perfect.

I was trying to get this done cheaper. I also plan to use two drivers so i can have say 3000k & 5000k going, run both 12hrs a day, 18hrs day for 5k during veg, 18hr of 3k flower. so one of them would be off 6hrs a day. Also would like the ability to dim one shade (3 or 5k) and keep the other at 100%...

really going for low, low heat and efficiency. I would need 3590, i had my eye on the newer Vero's but once the summer comes back around i will need to ditch the HPS. but the vero 29/gen 7 are just too hot and use too much juice compared to the cree 3590 and once you move to a good amount of LM561 s...