Search found 75 matches
- Thu May 12, 2022 12:04 am
- Forum: Home Assistant Gardening
- Topic: AC Infinity CLOUDLINE S6 - PWM to 0-10v help
- Replies: 13
- Views: 29805
Re: AC Infinity CLOUDLINE S6 - PWM to 0-10v help
Hey @stud I think something to note here is that there is a pretty big difference between the components that are being used to control these fans. L298n components really have nothing to do with PWM Optocouplers with appropriate resisters do control PWM L298n really only limit output voltages simil...
- Sat Feb 26, 2022 12:36 am
- Forum: Home Assistant Gardening
- Topic: Dosing Pumps Losing Prime
- Replies: 6
- Views: 3986
Re: Dosing Pumps Losing Prime
Do you have the ability to control the pumps in both directions? If so, an option might be to stop trying to keep prime (liquid in the line) and instead after each use of the pump you could reverse the flow so you are always starting from a known state (no liquid in the line). This way you can prog...
- Sat Feb 26, 2022 12:28 am
- Forum: Home Assistant Gardening
- Topic: Dosing Pumps Losing Prime
- Replies: 6
- Views: 3986
- Sat Feb 26, 2022 12:23 am
- Forum: Home Assistant Gardening
- Topic: any experience with atlas-scientific (wi-fi-hydroponics-kit)
- Replies: 66
- Views: 28740
Re: any experience with atlas-scientific (wi-fi-hydroponics-kit)
No, that seems very high. Ill check mine when I get home.
- Wed Feb 16, 2022 5:14 am
- Forum: Home Assistant Gardening
- Topic: DF Robot pH SEN0169-V2 Sensor ESPHome
- Replies: 0
- Views: 4982
DF Robot pH SEN0169-V2 Sensor ESPHome
Posting this incase anyone has this pH sensor and wants to use it with ESPhome. I had to manually calibrate it but it appears to be fairly accurate. I am using old calibration solution so I think calibration is not super accurate at the moment. The screenshot below is the probe sitting in pH 7 solut...
- Wed Feb 16, 2022 4:37 am
- Forum: Home Assistant Gardening
- Topic: Dosing Pumps Losing Prime
- Replies: 6
- Views: 3986
Dosing Pumps Losing Prime
Looking for some advise on an issue I have been trying solve. My dosing pumps lose prime over time (about a 1 day or so) I have installed check valves on the input tube and the output tube with no luck. I have also switch the position of the dosing pumps from above the dosing containers to below the...
- Fri Feb 11, 2022 7:59 pm
- Forum: Home Assistant Gardening
- Topic: Atlas scientific k1.0 calibration issues
- Replies: 2
- Views: 4364
Re: Atlas scientific k1.0 calibration issues
vdelgatto This is typical for the EC probe. The readings will not respond accurately until you complete the entire EC calibration. The pH probe does respond with the correct readings after each command. You can send sensor78-1 cal,? and it will display the current calibration points For the EC it i...
- Wed Feb 09, 2022 10:19 pm
- Forum: Home Assistant Gardening
- Topic: any experience with atlas-scientific (wi-fi-hydroponics-kit)
- Replies: 66
- Views: 28740
Re: any experience with atlas-scientific (wi-fi-hydroponics-kit)
I found how to change the MQTT send interval, in the console you have to change the TelePeriod.
Default = TelePeriod 300 (5 minutes)
I changed mine to TelePeriod 10 (10 seconds)
Default = TelePeriod 300 (5 minutes)
I changed mine to TelePeriod 10 (10 seconds)
- Wed Feb 09, 2022 8:22 pm
- Forum: Home Assistant Gardening
- Topic: any experience with atlas-scientific (wi-fi-hydroponics-kit)
- Replies: 66
- Views: 28740
Re: any experience with atlas-scientific (wi-fi-hydroponics-kit)
Hey stud , worked right away however I only configured the SCL and SDA and the readings showed up. I thought I still had to assign the sensors to the GPIO's. The readings seem accurate though. It appears as though Tasmota will only send updates every 5 minutes, is there a way to increase this ? main...
- Wed Feb 09, 2022 7:44 pm
- Forum: Home Assistant Gardening
- Topic: any experience with atlas-scientific (wi-fi-hydroponics-kit)
- Replies: 66
- Views: 28740
Re: any experience with atlas-scientific (wi-fi-hydroponics-kit)
Yes ESP32
I have it working esphome however I think I would prefer Tasmota for ease of calibration. I will give a try shortly and update.
Thanks!
I have it working esphome however I think I would prefer Tasmota for ease of calibration. I will give a try shortly and update.
Thanks!