Search found 13 matches

by sice
Tue Mar 30, 2021 5:32 am
Forum: Strips
Topic: BXEB-L1190U-27G3000-C-C3
Replies: 2
Views: 595

Re: BXEB-L1190U-27G3000-C-C3

im looking at the Thrives as an alternative... but then you need a special Bridgelux driver 2 channel. Unless its possible to adjust them with a regular driver.
by sice
Sat Jan 16, 2021 10:44 pm
Forum: Strips
Topic: Only 50% power on HLG-320H-C1050B and EB Slim3 strips
Replies: 2
Views: 495

Re: Only 50% power on HLG-320H-C1050B and EB Slim3 strips

Im still trouble shooting these. On the specs sheet I see that the Current Adj Rate is (525-1050mA) so for some reason the drivers are starting at 525mA since (525mA * 19.1) = 10.03 watts per strip. (16 strips) * (10.03) = 160.48 I tried using a potentiometer to see if I can turn them up but I can o...
by sice
Sat Jan 16, 2021 10:34 pm
Forum: Strips
Topic: Only 50% power on HLG-320H-C1050B and EB Slim3 strips
Replies: 2
Views: 495

Only 50% power on HLG-320H-C1050B and EB Slim3 strips

Ive connected 16 strips in series EB Slim 3 (590.00mm) to a HLG-320H-C1050B. When I power them on I only get ~170 watts. The goal is to get all the 300-320 wattage out of the driver and dim it down as necessary. I tried shortening the red and black cables that go from strips to driver but that had n...
by sice
Sat Jan 16, 2021 9:50 pm
Forum: Strips
Topic: Which driver to use ?
Replies: 4
Views: 534

Re: Which driver to use ?

Rated Current (mA) : 700 Rated Voltage (V): 26.1 Wattage at above rate : (.700) * (26.1) = 18.27 watts per strip. For 12 strips 219.24 watts total. 220 watts total 12 strips total so: (26.1 * 12) = 313.2 FV I'm pretty new OP but I've build a couple. It looks like based on the strips amount and detai...
by sice
Thu Dec 03, 2020 10:59 pm
Forum: Grows
Topic: New build, work in progress.
Replies: 75
Views: 47430

Re: New build, work in progress.

awesome.

Im amazed at how close the light it to the buds. :idea:
by sice
Thu Dec 03, 2020 10:54 pm
Forum: Grows
Topic: Updating Lighting- Micro ~24 in x 16 in
Replies: 2
Views: 3558

Re: Updating Lighting- Micro ~24 in x 16 in

So Ive had some months to play see how the lights perform. So far they are really performing nicely. I appreciate this whole site and without it I would not have been able to update my little grow area. The list from DigiKey is below. These are mixed colors to really hit them nicely. - 976-BXEB-L034...
by sice
Sat Jul 04, 2020 9:39 pm
Forum: Grows
Topic: Updating Lighting- Micro ~24 in x 16 in
Replies: 2
Views: 3558

Updating Lighting- Micro ~24 in x 16 in

Ive been growing for about a year using screw in LEDs that you can buy anywhere. The highest I had found at the moment was 17.5W that replaced the usual 100W cfl bulbs. Before LED I had grown using florescent PLL lights. Flowering under florescents is possible and you get some quality stuff except t...
by sice
Thu Jun 25, 2020 12:48 am
Forum: Grows
Topic: LED for Mother plants
Replies: 3
Views: 5318

Re: LED for Mother plants

psyweed wrote:
Thu Jun 18, 2020 9:03 pm
well where u want to get such board with only red or half red? :) its always in some mix 270white and 30 red or COB + extra red chip needs to be present.
for some reason i thought you were using strips
by sice
Mon Jun 15, 2020 9:12 pm
Forum: Strips
Topic: Looking for Opinions on Bridgelux EB3 90cri Strip Options
Replies: 31
Views: 4650

Re: Looking for Opinions on Bridgelux EB3 90cri Strip Options

i found them on the website and the singles are sold out. Just a quick question. How do you know if they are the CRI:90 model? https://www.futureelectronics.com/p/lighting-solutions--light-engine-led-assemblies--light-engines/bxeb-l1120z-30e4000-c-c3-bridgelux-7115970 found these in stock too but th...
by sice
Mon Jun 15, 2020 8:00 pm
Forum: Strips
Topic: Cheap Bridgelux EB Gen 3 480W - First Time Build
Replies: 13
Views: 4623

Re: Cheap Bridgelux EB Gen 3 480W - First Time Build

thanks for this example. hope it turns out awesome for your grow