Search found 24 matches
- Wed Aug 05, 2020 2:37 am
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
@TEKNIK Another question , power outages are rare but they do happen once in a while ... sometimes the electricity trips in the whole building for a few seconds and comes back so will my lights be safe ? Or do I need to do something so that they dont get damaged by outages and trips.
- Wed Aug 05, 2020 1:58 am
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
You will likely find that Arrow is cheaper for drivers than anyone local. If you use 2ft strips you will need to do a series/parallel connection. Not big deal to do this and it will be easy on a HLG320-42 Wanted to see if I can get it from local distributor so that I can avail the warranty if neede...
- Wed Aug 05, 2020 1:25 am
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
Its much better to ask questions than make a mistake. Your questions are fine, I just worry about people getting confused or over loaded with information. I saw you speaking with Cobshop, he is a good guy and not out to give you wrong info. There are multiple ways of achieving the same outcome and ...
- Tue Aug 04, 2020 8:36 pm
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
Your questions aren't stupid buddy, They are helping me and others out a lot with these builds as I can see what you're looking into and why then can make more informed decision on what I myself should put together. Getting better each build and could not do that without people like yourself listin...
- Tue Aug 04, 2020 12:50 pm
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
If you want efficiency then 15W per 2ft strip is what to aim for. HLG-150-20B is the right choice for 10 strips. No heatsinks will be required just a frame. I have seen you on RIU also asking about all of this, dont get yourself overloaded with information. Keep it simple as possible especially if ...
- Tue Aug 04, 2020 4:11 am
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
You will need a dimmer pot and some wires to connect it all as well as a frame, I dont have a list of components for you and dont have time to search digikey to find it all at the moment, sorry about that No worries thx a lot already :) Some bad news , just got a mail from the seller saying theres ...
- Mon Aug 03, 2020 1:26 pm
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
@TEKNIK Thanks a ton brother ! Can you please suggest me what else I need to order from Arrow or Digikey along with the driver ? Would be nice to get as many things together as possible since finding them locally is going to be a problem. Also will I be needing heatsink in this build ? (the tempera...
- Mon Aug 03, 2020 12:32 am
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
TEKNIK Thanks a ton brother ! Can you please suggest me what else I need to order from Arrow or Digikey along with the driver ? Would be nice to get as many things together as possible since finding them locally is going to be a problem. Also will I be needing heatsink in this build ? (the temperat...
- Sun Aug 02, 2020 11:25 pm
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
Also would it more sense to make 2 fixtures with 2 drivers so that if one fixture stops working for whatever reason , I have the other one to rely on ? Since replacing/buying new driver would take a long time with overseas shipping ? If the 2 fixture setup sounds good and more reliable so that my g...
- Sun Aug 02, 2020 11:37 am
- Forum: Strips
- Topic: Need driver advice for EB Gen3 Strips
- Replies: 33
- Views: 3875
Re: Need driver advice for EB Gen3 Strips
Also would it more sense to make 2 fixtures with 2 drivers so that if one fixture stops working for whatever reason , I have the other one to rely on ? Since replacing/buying new driver would take a long time with overseas shipping ? If the 2 fixture setup sounds good and more reliable so that my gr...