I did wire the strips from one side only but will that cause such a voltage drop ? at the moment the driver cant push out more than 38 volts. all wire is 0,75mm2 with maximum 35cm lenghts to a teminal block from there with 4mm2 40 cm to the driver. The strange thing to me is that the output is only ...

Its actual measurement putting fluke multimeter in series with phase on amp measurement.

Or is there an error in measuring the DC side of the driver? ( Fluke calibrated multimeter)

on the 220V side its pulling 2.2A ....


Vlaario

Hi fellow led enthousiasts. I builded a new rig with 26 bridgelux 1120mm led strips powered by HLG-480H-42A. now after my first grow which went fantastic, i decided to do some measurements on the power consumption. When the driver is maxed out both Vo 100% and Io 100% the power consumption from the ...

Hello everyone , After stumbling on this forum i decided to build my own. Just ordered parts at digikey and cant wait for it to arrive will start a topic when my stuff arrives. My build is going to be: 50x https://www.digikey.nl/products/nl?keywords=%20BXEB-L1120Z-35E4000-C-B3%20 Paired with 2x http...

Hi everyone, After sleeping under a rock for 5 years i stumbled on this forum and i thought WOW. When i seized my hobby 5 years ago i was under the impression that hps was the way to go at that time because led was overly expensive and not good enough to produce good yields for a reasonable price. M...

Hi everyone, After sleeping under a rock for 5 years i stumbled on this forum and i thought WOW. When i seized my hobby 5 years ago i was under the impression that hps was the way to go at that time because led was overly expensive and not good enough to produce good yields for a reasonable price. M...