Oh, maximum is 2.8A? Never mind me, was thinking of another strip. Try to figure out the sweet spot where you get enough strips that you don't need any heat sink at all. But they're also floppy strips so you need a stiff frame. Too many ways to skin the cat! I thought you might have been, how would...

A better idea: buy more strips instead of 2020 bars. Running those at 1.4A is not recommended if you value efficiency. How many would you recommend? 1400ma was the nominal current on the data sheet and says it should be 186l/w at 1400ma and 38.4v. Maximum current is 2800ma. These are the strips I'l...

Ok so I've been doing a bit more reading and decided a hlg 600h 42a driving 10 strips in parallel would be a good match. From what I can work out I'd only be slightly above nominal V and A rating of the strips so should be able to run them at the full 600w. Heat sinking I was thinking 25x19x3.2mm al...

Hi, New to led, been wanting to try for a while now but most are just so far out of my price range so after a little reading I've decided I will try and DIY one :) So I've been looking at the various strips available and come across these bridgelux gen3 high output strips https://www.bridgelux.com ›...