I'm new to the LT-FB24B strips and I'm having an issue with my build not lighting up. I'm running four 4' strips in parallel powered by an HLG-480H-48A. I used the two molex connectors at the one end of the strips when wiring. Only thing I can think of is that maybe with these having dual lengths o...

I would start from the beginning and hook up one strip at a time, make sure it fires. Then add another into parallel...then again, and again. Thanks for the response GreenGenes! I finally had time to get back to tinkering with the light. I dropped the drivers current to 3.5a and tested the leads of...

I connected a Meanwell 1400b to a single strip the same way I connected my buid and it powered right up. I'm very confused now... Any help would be much appreciated.

I tested the MeanWell and it's producing 50.84v and 10.32amps, so driver is working. Just think I don't have a closed circuit with the strips.

Here are some images of what I've done (Sorry kind of sloppy after tearing apart for testing): https://drive.google.com/file/d/106prfmedvUxCC5sN7Fmw6MvSC4hfaDRP/view?usp=sharing https://drive.google.com/file/d/1BqE9xsIA1saXSXs-aKkEA-B6EGl5RNYf/view?usp=sharing https://drive.google.com/file/d/1IT4IHS...

I'm new to the LT-FB24B strips and I'm having an issue with my build not lighting up. I'm running four 4' strips in parallel powered by an HLG-480H-48A. I used the two molex connectors at the one end of the strips when wiring. Only thing I can think of is that maybe with these having dual lengths of...