https://www.amazon.com/Aikenuo-Adhesive ... B075FRPXQ5

I used this stuff. Not quite as wide as the EB Gen 2 strips I used it with, but you'll have to consider your own application since you left it kind of vague.

I dug up an example of the genotype from my first picture, at day 46 under 24 cri HPS bulbs for development comparison.

It's all 80 cri.

Keep trying to stake these up but they are just finding ways to fall back over big time. Lots of density and an almost finished look in mid 40's days of flower. LED's can turn everything into faster finishers. The last pic, that genotype usually likes 68 days under HPS but not anymore, it's a whole ...

The leaf curl looks like it might be from a bit excess nitrogen. The very high light levels start to mess with transpiration rates and exacerbate any over feeding. Just my quick take. I think you're on top of it.

Hey. Didn't even notice on the English. You're doing well there, enough to have a nice technical discussion. Thanks for that. The 3500K is the temp of COB I run, in the 70v type Vero 29 in my application. Good choice there. It's the spectrum most of the made-for-market light fixtures have used histo...

Yeah they have a great price on these, getting the heatsinks included for same price as HLG is a great marketing position.

Here's a little layout of my Atreum board next to the HLG model.

I think I found the heatsink data. Looks to be inadequate, unfortunately.

https://datasheet.octopart.com/NX301103 ... 997282.pdf

Hey. No problem throwing that 36v COB onto the series circuit with the 2 50v COBs with that driver. The only thing is the 36v COB will be only maxing out near 65 watts so will be running lower power than the others. If it's for a flower light then the 3000K lights sound spot on. You could get anothe...

Is that how that is? I don't know exactly how that works, but I think my understanding was a bit different on the pots. I thought it was the 0-100% 1:1 with 0-100k ohm pots on the driver, however some of the common inexpensive pots with the higher tolerances of up to 10% (even on some data sheets I ...