Search found 4 matches
- Sat Jan 06, 2018 10:33 pm
- Forum: Strips
- Topic: Bridgelux EB Series Gen2
- Replies: 55
- Views: 15128
Re: Bridgelux EB Series Gen2
I did see some 1" square, but it was quite a bit more expensive (and heavier) than the angle stuff I got. The angle I got is actually 25mm one side and 20mm the other, so if I have my edges long side up (eg: L) then the long side of the whole light shouldn't be any more than 24" (20+560+20=600mm). I...
- Sat Jan 06, 2018 7:01 pm
- Forum: Strips
- Topic: Bridgelux EB Series Gen2
- Replies: 55
- Views: 15128
Re: Bridgelux EB Series Gen2
You say your tent is exactly 24" x 48". Is that the outside dimensions, or are you measuring between the poles? I have a DIY tent atm which is slightly bigger, but i assumed a manufactured one would be measured on the outside. I can't see how to make the long side less than 24" as the led strips are...
- Sat Jan 06, 2018 5:21 pm
- Forum: Strips
- Topic: Bridgelux EB Series Gen2
- Replies: 55
- Views: 15128
Re: Bridgelux EB Series Gen2
Hey Buck5050, that looks good and very much like I'm planning. I'm doing 2x 2'x2' so I can use both in a 4x4 tent, or one each in two 2x2s. They will be 600mm x 550mm tho, so they will fit in between the poles. I'm trying to plan them for max versatility so I'm less likely to need to rebuild them. D...
- Thu Jan 04, 2018 9:11 pm
- Forum: Strips
- Topic: Bridgelux EB Series Gen2
- Replies: 55
- Views: 15128
Re: Bridgelux EB Series Gen2
I'm in a similar situation to Buck5050 in that I have a 2x4 grow space. However I figure that I need about 30w per square foot, so a total of 240w. I'm planning on using BXEB-L0560Z-35E2000-C-B3 strips, but 16 of them, with the HLG-320H-20A driver. At full power this would provide a maximum of 16A, ...