Hello folks. I've got some new toys and I'm looking for any info on whether it will be sufficient for my space. I have 4 x of these kits https://app.alibaba.com/dynamiclink?touchId=62018422387&type=product&schema=enalibaba%3A%2F%2Fdetail%3Fid%3D62018422387%26ck%3Dshare_detail&ck=share_detail&shareSc...

As the topcs says, could I run 8 of these cobs ( Citizen CLU048 1212 ) on a HLG 320h c1400 ?

yeah 3 would be the minimum.. but that's running those at 300 each out of the 372w max.. it would definitely be better to run more at a lower wattage if you can.. 6 really wouldn't be over kill, just less heat per board and a better spread than just the 3... and being CV drivers you can just keep a...

so basically your running close to a 4x8 ( 1.4m x 2.8m) 600w total would be 300 per 4x4 ( 1.4 x 1.4) it's not quite 30w per sqft that we normally recommend for flower but one board per side would work.. the best thing would be if your able is get a 3rd board on a 320h-46/48.. that would put you aro...

::: Edited ::: I also run Far red,deep red, and I.R DIY rails that ill be converting to DIY pucks . Im using 2 x of these at the momment in a 1.2 x 2.4m space http://i67.tinypic.com/n4fuao.jpg The COBS on the green heat sinks are 3500k and the ones on the black are 3k, and the diodes are far red but...

Howdy folks, I'm looking at getting the following Single 800leds pcb with black heat sink(940*195*10mm) PCB size: 900*280*2.0mm, 3.0/W conductivity, 2OZ, 129-372W, 48V, 3-7.5A, 800pcs Samsung LM561C S6 led How many of these would I need to cover a 1.2m x 2.4m area, I'll also be addimg one of the wid...

Ive been looking at the Exotic Supplimental Booster board on RapidLED which has 9 uva, and 9 IR leds on it, but its 90 dollars for 1 board ! Id rather build some shiz myself.

Hello foljs. Ive been mulling over the idea of adding some UV leds to my 36 x citizen clu048 3000k & 3500k cobs since i got rid of my cdm gear, and would like to know what you guys think of the following leds. My area is 2.4 x 1.2m 24 x clu048 1212 3500k 12 x clu048 1212 3000k 12 x epistar 3w far re...

I decided to remote mount my drivers due to thee weight they added to my fixures. Im running 6 x hlg 320H C1400B for 36 x citizen clu048. I was a little concerned about running them remotely but just use a decent enough gauge wire to run from cobs to the drivers. I think i have a 3m run to each driv...

I'm guessing your measurements are in cm? If so, about 200w max would give you 35w per square ft. I'll give you some options using strip lights. I would Definately invest in a digital dc amp, volt, and wattage display, so you don't overdrive the strips. Just start the pot off at lowest setting, and...