okay.... ledg.... I will split the set up 7 and 8 just make sure its kind of balanced....thanks for the help

thanks a lot my friend for in input....
my setup/plan is now to connect 9 strips one one output wire and 6 strips on the other one

is that okay qua current?
the strips are 23 volt at 1.2 amp and I wire them paralel

high guys... My build involves 15 f generation 2 foot ledstrips which use 390 watts My driver is a hlg 480H24A It has 2 output wires, they have the same specs I want to use paralel connection Question: Since I use paralel wiring for the 15 x 23 volt strips, it seems to me (total electronic newbee) I...

high guys... My build involves 15 f generation 2 foot ledstrips which use 390 watts My driver is a hlg 480H24A It has 2 output wires, they have the same specs I want to use paralel connection Question: Since I use paralel wiring for the 15 x 23 volt strips, it seems to me (total electronic newbee) I...

Hey there green giant.... Giant oops in the conversion from sq meters to feet... Turns out 1.3 mtr = 10.76 sq feet... hence my doubts between 3x3 and 3x4.... In the meantime I watched the vdo's on drivers and spend hours on end searching hi(gh) and low for the f series strips... wanted to go with th...

My growspace is 4.2 sq foot and I would like to do a 3x4 build to cover that.

Has anybody seen specs for that?

Grtzzz

Thanks again! And now that I have your attention... :) My set up is 5 x 45 liter pots, situated in a corner in a triangle so to speak, so 1 pot in the corner and 2 next to it at each wall, which makes the grow space about 4.2 sq foot. 3x3 build seems too little and 4x4 seems too big... do I scale up...

Thanks for the info mate! But.... being a total newbee at this... one more question.... If my driver allows me to run it on 75%, which would be the safe and perfect option for these leds, why do I still need the potentiometer to make it even less than 75%? And in case I don't have to use the potenti...

High Guys.... My first build: Samsung F-Series LT-F564B 2′ LED Strip Build – 3’x3′ Being a newbee at this.... The build itself looks simple enough, but I don't have a clue how you exactly tune the whole setup with that potentiometer so it all runs on maximum effienciency... Anybody? Thanks in advanc...