I can get nearly anything from digikey, but as main light source are four ''cobs'' that run 24V @1.2A I should get some strips that runs 24V too.

Only 24V strips I can find are these M series, if You know about any better solution I'll be very happy.

I will use these, they are not as good as in fluxes but probably can't find anything better that will fit in smoothly.

anyone please?

For flower only 3000k better.

My opinion is that 2700K 90CRI with added 630nm would be the best.

Yes that's correct. I prefer B Version just due to design to be honest. I love when I can put all the wagos, switches, cables, connector and potentiometer into box. It just looks better. I have another question it's about another light I'm just upgrading. It consists of 4 custom "COBs" that are 23-2...

these drivers have been used long time ago in HS1 light from GN.

great technology

Hope they will.

2700k 90CRI mixed with some 620nm, that would be sweet

Hello, I'm planning to build another light that will consists from 10 * LT-F564B strips @3000k. Looking at the datasheet it seems like: fV = 46V Imax = 1.800mA Don't want to run them harder then 75% which means: 1.400mA ish max. 1.4*46=64.4W per strip. that mean 644W in total when running them with ...

I kind of like it and not.

I would never put drivers on the piece of wood / mdf, just to be extra safe, but thats me.

2x Apolo6 custom ( same as MS006 ) 1x HS1 1x custom LM301B Samsung strip board 12x 1ft strips 1x custom cob light 120W It has all kind of spectrum mixed all together. Keep changing it all the time, from my experience this works best. I mean tilting lights so every plant has different spectrum all th...