Whats up all, I've moved on from my tent to a 5x8 room. I'm utilizing about 3x6 of it for growing. Currently I'm using 6 photon fantom boards. However, the PPFD really drops off on the back side of the room and around the sides, anything that isn't directly under a board. I've been playing with the ...

Or are you deficient in power above? Whats your wattage now? People here would estimate you need 480w for 16 square foot. I think that actually generates a level of light that for example fluence would advise running CO2 with I went ahead and got 3 of the 4000k boards. Mixed with the 3 I already ow...

Never heard about the product before. You said its the lm561c but I saw some thread at RIU where user 'grand blunt wizard' is talking about a propriety spectrum with high cri in the fusion boards? The gear seems pretty ok. I saw something the owner was writing, and at the time he didnt have all the...

Good morning all, I'm currently growing in a 2x4 tent. It sucks. My 2 plants eat every square inch of room inside. Im wanting to transition out of the tent and use the room instead. The rooms footprint isn't big, 4x8. It's a closet addition, actually. I want to use the back half, so 2x8, as the grow...

Hey guys, planning an upgrade to my current fixture. Currently I've got 2 wavy boards screwed to a simple aluminum angle rectangle. They are being hung by 2 taught pieces of paracord that run on each side as anchors and then a ratcheting hanger holding on to each piece of cord. This allows me to get...

Thanks jolly. I'd only go to 3 boards, otherwise I'd need a new driver. I think I'll complete this grow with what I've got, and add a third board while popping new seeds. I just somehow feel the boards being horizontal vs vertical is better. For my fixture, I just used aluminum angles. Simple rebuil...

Morning all, I've currently got 2 wavy boards mounted to a fixture to fill my 2x4 tent length wise. So, it covers one side each of the 4 foot width. I've been thinking about optics on these boards and whether there is a difference to mounting them the opposite way, to cover depth. I've been thinking...

Is the driver you're dimmable? If i'm right they are about 36V boards being run at 2100mA on a constant current driver, giving you about 140 or so watts from the wall? If you have decent ventilation and a couple of fans try dropping it to 12" then put your hand at the canopy and see what the temp's...

I've got a fixture with two photon phantom wavy boards running at 2.1a. Website gives stats at 288 umol @ 18". Ive got 2 seedlings and am wondering what height you guys suggest I keep the boards. Currently at 24 inches but I feel I could be closer.

So I've never used a multimeter and I want to measure the current going to my 2 wavy boards. I've got them wired to a hlg 320h c2100a and want to adjust the internal pot. The boards each have a set of wago connectors built in and then a set of separate + and - ports on either side. I've got them wir...