Hello everyone, I am from Chile and new to the forum, I do not know much about LED panels cob, I would like to know your opinions about this panel, (attached link below) I need it for a culture tent of 100cm x 100cm, thank you for your help, greetings
Adjunto link
CREE CXB3590 300 W COB regulable LED crecen luz espectro completo LED lámpara 38000LM
https://s.click.aliexpress.com/e/FGnOR3w
Led cob aliexpress
the powersupply is 36V constant voltage, 200W
the lights themselves are being run at ~66 W a piece
one would veg 3"x3" fine ( < 1mx1m )
two of these would flower a 4"x4" which is > than 1mx1m
100W of cob is good to flower up to 2'x2' space from what i gather.
the lights themselves are being run at ~66 W a piece
one would veg 3"x3" fine ( < 1mx1m )
two of these would flower a 4"x4" which is > than 1mx1m
100W of cob is good to flower up to 2'x2' space from what i gather.
definitely the CXB3590s
from the clu048-1212 specs:
https://ce.citizen.co.jp/lighting_led/d ... 0_0516.pdf,
it operates at 35V so lets assume its the same operating voltage as CXB
but they can only be driven at a max of 2700 ma ( the thing could fry if driven > 110W)
the CXB's can be driven in excess of 3500 ma (i think their max watt rating is >200W, but obviously you don't want to do this).
running them at 60W is considerably low. running at 100W is at <50% of its max, so am assuming 100W is super safe for the CXB (>50000 hrs lifetime).
given that, buying your own driver in the future so you can run them at even higher powers, in your own DIY configs.
i am new here, so anyone please correct me if i'm misleading this person, but as far as i've read this all makes perfect sense
from the clu048-1212 specs:
https://ce.citizen.co.jp/lighting_led/d ... 0_0516.pdf,
it operates at 35V so lets assume its the same operating voltage as CXB
but they can only be driven at a max of 2700 ma ( the thing could fry if driven > 110W)
the CXB's can be driven in excess of 3500 ma (i think their max watt rating is >200W, but obviously you don't want to do this).
running them at 60W is considerably low. running at 100W is at <50% of its max, so am assuming 100W is super safe for the CXB (>50000 hrs lifetime).
given that, buying your own driver in the future so you can run them at even higher powers, in your own DIY configs.
i am new here, so anyone please correct me if i'm misleading this person, but as far as i've read this all makes perfect sense
oh yea and lumen output
1xCXB @ 2A is >10,000 lumens
for easy comparison
2x CLU @2x1A is >10,000 lumens too
so the lights (assuming similar spectrum) are essentially as efficient as each other (they convert same amount of high-energy electrons into photons)
that being said, you'd need to buy roughly 2xCLUs to match every 1xCXB,
so as efficient but
not cheaper for higher power builds,
not as wide of operating range (CXB 1400ma-3500ma) so not as scalable in DIY rigs
1xCXB @ 2A is >10,000 lumens
for easy comparison
2x CLU @2x1A is >10,000 lumens too
so the lights (assuming similar spectrum) are essentially as efficient as each other (they convert same amount of high-energy electrons into photons)
that being said, you'd need to buy roughly 2xCLUs to match every 1xCXB,
so as efficient but
not cheaper for higher power builds,
not as wide of operating range (CXB 1400ma-3500ma) so not as scalable in DIY rigs
Hello,
I would like to ask for advise:
I need around 70-100w for Grow LED for area 60x60cm.
I've checked few 1xCOB LEDs set on Ali and im thinking about such SET:
https://www.aliexpress.com/item/100W-CR ... 43993.html
https://www.aliexpress.com/item/CREE-CX ... 34847.html
For grow should be best option 4000k but seems like they dont have those option, may i need to ask them extra.
1. Could you please suggest if the price/value its good or is better to order all those parts extra and build it by my self?
2 . Most what im not sure what to pick right - Chip and Driver
2.1 Vero 29
2.2 CXB3590
2.3 Citizen CLU058
Thanks
I would like to ask for advise:
I need around 70-100w for Grow LED for area 60x60cm.
I've checked few 1xCOB LEDs set on Ali and im thinking about such SET:
https://www.aliexpress.com/item/100W-CR ... 43993.html
https://www.aliexpress.com/item/CREE-CX ... 34847.html
For grow should be best option 4000k but seems like they dont have those option, may i need to ask them extra.
1. Could you please suggest if the price/value its good or is better to order all those parts extra and build it by my self?
2 . Most what im not sure what to pick right - Chip and Driver
2.1 Vero 29
2.2 CXB3590
2.3 Citizen CLU058
Thanks