I thought I had everything measured out now looking at the chart here I question what I have bought and if it matches. Any help would be appreciated and if need be I can purchase different drivers.
3 X hlg-240-h-C1400B
6 Vero 29 SE B
Thank You
Countryfarmer
Vero 29 SE help please
- bvolt
- Forum's First Member!
- Reactions:
- Posts: 378
- Joined: Wed Jun 07, 2017 6:05 am
- Location: Boston
- Contact:
I think it's possible you are a tiny-bit confused... Veros are either "SE" (which is the same as "D") or just "B".
2 or 3 Vero "B" can fit on the driver you purchased or
3 or 4 Vero "D or SE" can also fit.
It's fairly common to see the Vero "B" driven at 2100mA, as the 50v Vero B driven at 2A puts out 100w (you'd need a splayed pin or active cooled pin heatsink).
Sorry if that's not the news you were hoping for... but that is a great driver for the standard "COB bar" - 4 COBs / 200w.
2 or 3 Vero "B" can fit on the driver you purchased or
3 or 4 Vero "D or SE" can also fit.
It's fairly common to see the Vero "B" driven at 2100mA, as the 50v Vero B driven at 2A puts out 100w (you'd need a splayed pin or active cooled pin heatsink).
Sorry if that's not the news you were hoping for... but that is a great driver for the standard "COB bar" - 4 COBs / 200w.
You might wanna double-check anything you've read here...
-
- LED Enthusiast
- Reactions:
- Posts: 50
- Joined: Sun Sep 03, 2017 2:15 pm
im pretty sure the SE chips come in all 3 voltages now. so there would be a se B kinda eh?
Yup, you can get Gen 7 B, C, or D, as well as SE B, C, or D. SE is essentially a Gen 7 with poke in connectors rather than those pico ez-mate connectors. Their specs are near-identical.
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Hi Countryfarmer, thanks for signing up.Countryfarmer wrote: ↑Mon Sep 18, 2017 7:27 pmI thought I had everything measured out now looking at the chart here I question what I have bought and if it matches. Any help would be appreciated and if need be I can purchase different drivers.
3 X hlg-240-h-C1400B
6 Vero 29 SE B
Thank You
Countryfarmer
Your parts list matches nicely. You've got the right drivers for that number of B version Veros.
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
- LED-Curious
- Reactions:
- Posts: 3
- Joined: Mon Sep 18, 2017 7:01 pm
Great thank you so much that was quick.
- bvolt
- Forum's First Member!
- Reactions:
- Posts: 378
- Joined: Wed Jun 07, 2017 6:05 am
- Location: Boston
- Contact:
That should read: please take my phone away when I'm medicated, I sometimes am a bit confused.
Possibly because I have SE Ds on my 320/1750 rail? Or that I was baked.
You might wanna double-check anything you've read here...
I'm going to go with the latter! No judgment here though dawg
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!