Check out this mini DWC PC case I built.
It was initially fitted with two 100W Chinese "full spectrum" cobs from SGrow, I then swapped those out for two 50 watters. One of them is still an SGrow full spectrum, the other is an 80% full spectrum, 20% cool white from some other aliexpress supplier (forgot who).
Features include a bunch of 3d printed bracketry for mounting various bits, carbon filter panels as used in air cleaning vacuum things for soldering, 240mm radiator, 4 x Noctua 120mm fans, touchscreen fan and water pump controller with temp readout at copper water block, LCD screen for post COB coolant temp, another LCD for air temp, flow speed indicator, 3d printed shroud, corflute DWC res folded up and glued with hot glue gun, and internally sealed with silicone... ummm, and yeah. Built with attention to detail
These pics were taken just before actually being finished. All I really added was some white diffuse material to the inside walls of the case.
Oh one more thing... popped the Apogee SQ520 Quantum meter under the 50W COBs that are in there now with 90 degree lenses... the "full spectrum" SGrow cob was hitting 1600ppfd at approximately 8" height from sensor, the 80% full spectrum 20% cold white was only getting about 1000ppfd at the same height.
Design phase:
that get in love with this kind of stuff (not physically)
