8 x 4 space - Looking to replace 4 x 315w CMH
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Sun Jan 21, 2018 9:19 pm
Thanks mate. I'll update with some pictures now it's all finished and set up.
If anyone knows what sort of volt meters I should get so I can see what the watt / amp / volts the cobs are using as I'm going to be using potentiometers to dimm. Do I get the a.c. or dc versions ?
::: edit :::
Actually I think I found my answer while looking through an article on here, I think I need s DC meter right ?
They will pretty much all do both AC and DC. DC is most important though since that's what the output side runs.
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Sun Jan 21, 2018 9:19 pm
Sorry, I don’t quite follow. What do you mean?Huktonponics wrote: ↑Wed Feb 07, 2018 6:34 pmwhich would be the easiest to wire up if my drivers, pots, and meters are in the tent ?
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Sun Jan 21, 2018 9:19 pm
LEDG wrote: ↑Wed Feb 07, 2018 6:39 pmSorry, I don’t quite follow. What do you mean?Huktonponics wrote: ↑Wed Feb 07, 2018 6:34 pmwhich would be the easiest to wire up if my drivers, pots, and meters are in the tent ?
Apologies, I malfunctioned there for a minute, I get it now. Found a sketch someone drew up regarding the wiring The DC side will tie into the output from the driver. Still learning this shit
That is beautiful! Do the corner braces make it somewhat rigid?
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Sun Jan 21, 2018 9:19 pm
-
- LED Enthusiast
- Reactions:
- Posts: 27
- Joined: Sun Jan 21, 2018 9:19 pm
Here they are over the girls. 4 x Black Cherry Punch by Inhouse Genetics, 3 x Gelato's by an unknown breeder ( bagseeds lol ), 3 x Double Agent ( OOKB x Silky Johnson ) by Inhouse Genetics.
The Double Agent is a Reg, so im keeping a close eye on them aswell as the gello for any signss of nut sackage ! Flipped them yesterday and im running the cobs at about 60% ( guesstimate ).
Ignore the bare Potentiometers, im waiting on my hobby boxes and meters. I installed the 50k potentiometers since this picture so its 1 pot per aray.
The Double Agent is a Reg, so im keeping a close eye on them aswell as the gello for any signss of nut sackage ! Flipped them yesterday and im running the cobs at about 60% ( guesstimate ).
Ignore the bare Potentiometers, im waiting on my hobby boxes and meters. I installed the 50k potentiometers since this picture so its 1 pot per aray.
Hey can u tell me where I get all the stuff to build these too I’m in Canada I really like this setup I am brand new to these cob lights how much watts do both lights use and can u tell me how much it will roughly cost to build it all
- Jolly Green Giant
- LED Wizard
- Reactions:
- Posts: 835
- Joined: Thu Jun 15, 2017 1:35 am
- Location: somewhere in NY
haha I see you Mr Brad Bey ( as bingus would say) or was it Barbie? sorry I had too...
sorry I just threw this in here...had to say hi to another GML fan where did you get most of your supplies up north hulk? awesome job by the way