Page 1 of 1
Vero 29 SE help please
Posted: Mon Sep 18, 2017 7:27 pm
by Countryfarmer
I thought I had everything measured out now looking at the chart here I question what I have bought and if it matches. Any help would be appreciated and if need be I can purchase different drivers.
3 X hlg-240-h-C1400B
6 Vero 29 SE B
Thank You
Countryfarmer
Re: Vero 29 SE help please
Posted: Mon Sep 18, 2017 10:45 pm
by bvolt
I think it's possible you are a tiny-bit confused... Veros are either "SE" (which is the same as "D") or just "B".
2 or 3 Vero "B" can fit on the driver you purchased or
3 or 4 Vero "D or SE" can also fit.
It's fairly common to see the Vero "B" driven at 2100mA, as the 50v Vero B driven at 2A puts out 100w (you'd need a splayed pin or active cooled pin heatsink).
Sorry if that's not the news you were hoping for... but that is a great driver for the standard "COB bar" - 4 COBs / 200w.
Re: Vero 29 SE help please
Posted: Mon Sep 18, 2017 11:24 pm
by secondhandname
im pretty sure the SE chips come in all 3 voltages now. so there would be a se B kinda eh?
Re: Vero 29 SE help please
Posted: Mon Sep 18, 2017 11:38 pm
by LEDG
Yup, you can get Gen 7 B, C, or D, as well as SE B, C, or D. SE is essentially a Gen 7 with poke in connectors rather than those pico ez-mate connectors. Their specs are near-identical.
Re: Vero 29 SE help please
Posted: Mon Sep 18, 2017 11:41 pm
by LEDG
Countryfarmer wrote: ↑Mon Sep 18, 2017 7:27 pm
I thought I had everything measured out now looking at the chart here I question what I have bought and if it matches. Any help would be appreciated and if need be I can purchase different drivers.
3 X hlg-240-h-C1400B
6 Vero 29 SE B
Thank You
Countryfarmer
Hi Countryfarmer, thanks for signing up.
Your parts list matches nicely. You've got the right drivers for that number of B version Veros.
Re: Vero 29 SE help please
Posted: Tue Sep 19, 2017 12:38 am
by Countryfarmer
Great thank you so much that was quick.
Re: Vero 29 SE help please
Posted: Wed Sep 20, 2017 1:06 am
by bvolt
bvolt wrote: ↑Mon Sep 18, 2017 10:45 pm
I think it's possible you are a
tiny-bit confused...
That should read: please take my phone away when I'm medicated, I sometimes am a bit confused.
Possibly because I have SE Ds on my 320/1750 rail? Or that I was baked.
Re: Vero 29 SE help please
Posted: Wed Sep 20, 2017 2:58 am
by LEDG
bvolt wrote: ↑Wed Sep 20, 2017 1:06 am
bvolt wrote: ↑Mon Sep 18, 2017 10:45 pm
I think it's possible you are a
tiny-bit confused...
That should read: please take my phone away when I'm medicated, I sometimes am a bit confused.
Possibly because I have SE Ds on my 320/1750 rail? Or that I was baked.
I'm going to go with the latter! No judgment here though dawg