DIY LED LUMINUS CXM32
Posted: Thu Feb 18, 2021 1:29 am
Hello there,
I am putting together few lamps (up to 4,2kWs ish) so 700/piece and could you an experts opinion/advice about the setup I came up with.
so here we go:
6x CXM32 gen4 (4 of them driven by HLG-480h-2100c / another 2 by HLG-240h-2100c )
lens i was looking at Stella WSM/HB from LEDIL.
Heatsinks I thought would be fine are:
https://www.digikey.cz/product-detail/c ... D/12090796
2 of these, cooled with a fan(I havent chosen). so 3COBs on each sink.
What do you think about it? Its my first real time putting together some LEDs. really would appreaciate your opinions advices how to improve/eventually what to substitute for what.
also I found in some topics saying gen3 luminus are more efficiant. Would you recommend me to go for 3000K90cri gen3s instead of gen4?
gen3s comes way cheaper however price isnt priority I look at.
Thanks for tips..
V
I am putting together few lamps (up to 4,2kWs ish) so 700/piece and could you an experts opinion/advice about the setup I came up with.
so here we go:
6x CXM32 gen4 (4 of them driven by HLG-480h-2100c / another 2 by HLG-240h-2100c )
lens i was looking at Stella WSM/HB from LEDIL.
Heatsinks I thought would be fine are:
https://www.digikey.cz/product-detail/c ... D/12090796
2 of these, cooled with a fan(I havent chosen). so 3COBs on each sink.
What do you think about it? Its my first real time putting together some LEDs. really would appreaciate your opinions advices how to improve/eventually what to substitute for what.
also I found in some topics saying gen3 luminus are more efficiant. Would you recommend me to go for 3000K90cri gen3s instead of gen4?
gen3s comes way cheaper however price isnt priority I look at.
Thanks for tips..
V