MARSHYDRO TSW 2000 POWER SUPPLY FAIL

Discuss COBs or any other types of LEDs that don’t fit the other categories (Cree, Citizen, Migro, etc.).
Forum rules
Post Reply
jungleman420
LED-Curious
LED-Curious
Reactions:
Posts: 4
Joined: Fri Jul 09, 2021 12:02 am

hi everone new here i have a marshydro tsw 2000 for around 1 year never pushed the unit at max constantly now i have a problem is other day one of the power supply drivers went down only got one side of the leds working so 300w light has turned into a 150w i need a replacement driver any suggestions? plus the juson technology co ltd driver power supply model:LPN-150N-54E i dont rate these drivers get well to hot when pushed i had to go back to my hps set up and that digital ballast pushing 250w is just warm even after 18 hours stright deffo dont want to stay on hps too long is there a driver power supply i can use other than the ones marshydro included with the tsw2000 help needed asap thankz people keep the vibes alive......
Top
PeteR_1
LED Tinker
LED Tinker
Reactions:
Posts: 368
Joined: Sun Jul 05, 2020 1:10 am

jungleman420 wrote: ↑
Fri Jul 09, 2021 12:14 am
 hi everone new here i have a marshydro tsw 2000 for around 1 year never pushed the unit at max constantly now i have a problem is other day one of the power supply drivers went down only got one side of the leds working so 300w light has turned into a 150w i need a replacement driver any suggestions? plus the juson technology co ltd driver power supply model:LPN-150N-54E i dont rate these drivers get well to hot when pushed i had to go back to my hps set up and that digital ballast pushing 250w is just warm even after 18 hours stright deffo dont want to stay on hps too long is there a driver power supply i can use other than the ones marshydro included with the tsw2000 help needed asap thankz people keep the vibes alive......
You could use an XLG-150-H-AB as a direct replacement (almost exact same electrical specs)... https://www.digikey.com/en/products/det ... B/10222586
Top
jungleman420
LED-Curious
LED-Curious
Reactions:
Posts: 4
Joined: Fri Jul 09, 2021 12:02 am

ok thankz nice 1 for the info
Top
Thumbs
LED-Curious
LED-Curious
Reactions:
Posts: 1
Joined: Wed Sep 29, 2021 11:42 am

PeteR_1 wrote: ↑
Fri Jul 09, 2021 2:39 pm
You could use an XLG-150-H-AB as a direct replacement (almost exact same electrical specs)...

https://www.digikey.com/en/products/det ... B/10222586
Great advice, I got the unit from Power Supplies Online which saved a lot of time and money instead of shipping it from the US from digikey
Top
Roinujtsepxes
LED-Curious
LED-Curious
Reactions:
Posts: 2
Joined: Sun Mar 13, 2022 11:04 pm

Is there any wiring to be done when switching to the mean well drivers?
I've just had one of them go out and want to swap both drivers on 2 lights. Also do they still have the dimming option?
Top
Roinujtsepxes
LED-Curious
LED-Curious
Reactions:
Posts: 2
Joined: Sun Mar 13, 2022 11:04 pm

Thumbs wrote: ↑
Wed Sep 29, 2021 12:08 pm
PeteR_1 wrote: ↑
Fri Jul 09, 2021 2:39 pm
You could use an XLG-150-H-AB as a direct replacement (almost exact same electrical specs)...

https://www.digikey.com/en/products/det ... B/10222586
Great advice, I got the unit from Power Supplies Online which saved a lot of time and money instead of shipping it from the US from digikey
Read above any help would be appreciated. Cheers.
Top
Post Reply

Return to “COBs & Other LEDs”