Powering one vero 29 d
Dimmable?
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
Kiwi_Jezza
- LED Enthusiast
- Reactions:
- Posts: 45
- Joined: Sun Jan 21, 2018 12:30 am
That Vero would be more like 37.6v at 2.1A, so almost 80 watts.
https://nz.mouser.com/ProductDetail/MEA ... cbCw%3d%3d
Sorry for the link to the NZ website - this A type driver has two pots so you can adjust the current and voltage. It will deliver 2.66A which is still within spec for the Vero (although out of efficacy range). ELG150's were only a few dollars more also.
Hope this helps.
https://nz.mouser.com/ProductDetail/MEA ... cbCw%3d%3d
Sorry for the link to the NZ website - this A type driver has two pots so you can adjust the current and voltage. It will deliver 2.66A which is still within spec for the Vero (although out of efficacy range). ELG150's were only a few dollars more also.
Hope this helps.