Page 1 of 1
Powering one vero 29 d
Posted: Wed May 16, 2018 5:45 am
by Oilll
Simple question. The cheapest driver for a vero 29 se d @ 35v. 2100ma. It's one cob for my mother and clones.
Re: Powering one vero 29 d
Posted: Wed May 16, 2018 6:34 am
by LEDG
Dimmable?
Re: Powering one vero 29 d
Posted: Wed May 16, 2018 6:36 am
by Kiwi_Jezza
That Vero would be more like 37.6v at 2.1A, so almost 80 watts.
https://nz.mouser.com/ProductDetail/MEA ... cbCw%3d%3d
Sorry for the link to the NZ website - this A type driver has two pots so you can adjust the current and voltage. It will deliver 2.66A which is still within spec for the Vero (although out of efficacy range). ELG150's were only a few dollars more also.
Hope this helps.