The fruits of our labor. We welcome all types of plants, but grows posted here must be legal.
-
Mike
- LED Enthusiast
- Reactions:
- Posts: 38
- Joined: Sun Apr 14, 2019 12:34 pm
Drip rings, 1/2 line, glued in pvc and ran return for pump
-
Mike
- LED Enthusiast
- Reactions:
- Posts: 38
- Joined: Sun Apr 14, 2019 12:34 pm
Forgot to show inside the reservoir, small pond pump for the drip rings.
-
Mike
- LED Enthusiast
- Reactions:
- Posts: 38
- Joined: Sun Apr 14, 2019 12:34 pm
Finished the project.
Added air pump, lines, stones. Drilled thru the lid to prevent leaking from current system.
See how things go with first run tomorrow
-
Mike
- LED Enthusiast
- Reactions:
- Posts: 38
- Joined: Sun Apr 14, 2019 12:34 pm
Also added parts
1-1/2” flex hose
2” hose clamps (10 pk)
1-1/2” 90 degree pvc (2)
1-1/2” barbed fitting (4)
-
StanLee
- LED-Curious
- Reactions:
- Posts: 9
- Joined: Wed May 29, 2019 11:41 pm
Interesting! I did a DIY overcurrent but i want to switch to undercurrent.
The problem i have right now is that whenever the roots clog the systems, the bubble buckets overflow.
where did you get your waterpump?
-
Mike
- LED Enthusiast
- Reactions:
- Posts: 38
- Joined: Sun Apr 14, 2019 12:34 pm
Amazon! It works great but thinking about adding filters to the intake before the pump .
One to each bucket before the pump. If anything goes wrong it’ll be a fun project to rip apart.
I should ask for commission
-
Mike
- LED Enthusiast
- Reactions:
- Posts: 38
- Joined: Sun Apr 14, 2019 12:34 pm
Running pump on low and keeping water temps below 68 degrees
2 hlg 260 v2
1 king Led 1200
The new ones have a nice bloom/veg setting but the one I have in this setup does not have that option.