Three-way side-by-side:
High lights
Vs.
288s
Vs
96es
Or_Gro and the epic smackdown
- Randomblame
- LED Enthusiast
- Reactions:
- Posts: 40
- Joined: Sat Jun 22, 2019 6:28 am
What's up, my mongo frogs? Finally found the time to subscribe here.
@Teknik Sorry, bro! It was actually planned much earlier...
@Or_Gro, @Frank Cannon seems the gang is almost complete, lol!
@Teknik Sorry, bro! It was actually planned much earlier...
@Or_Gro, @Frank Cannon seems the gang is almost complete, lol!
-
- LED Enthusiast
- Reactions:
- Posts: 76
- Joined: Thu Jun 20, 2019 11:18 am
The Gangster himself no less!!
Glad you finally made it mateRandomblame wrote: ↑Sat Jun 22, 2019 6:54 amWhat's up, my mongo frogs? Finally found the time to subscribe here.
@Teknik Sorry, bro! It was actually planned much earlier...
@Or_Gro, @Frank Cannon seems the gang is almost complete, lol!
Find me on Instagram led_teknik
- Randomblame
- LED Enthusiast
- Reactions:
- Posts: 40
- Joined: Sat Jun 22, 2019 6:28 am
Yeah, I wanted to stay in contact, bro!.
I've just not enough time ... like almost always!
I'm lucky when I find a few hours here and there.
For the same reason I still work on my new lights, lol!(4pc 27k HL boards + 48w UV) DIY heat sinks and housings are almost done. Next thing is building the driver case for 4 MW drivers, the Sonoff timers and DC power meters to hang it outside the groom on the wall. Maybe I will integrate an Ilumi Meshtek controller when I can find the 4 channel 1-10v controller somewhere. .
Working slow leaves at least more time for improvements.
As soon as I have the permissions I'll upload a few pics..
I've just not enough time ... like almost always!
I'm lucky when I find a few hours here and there.
For the same reason I still work on my new lights, lol!(4pc 27k HL boards + 48w UV) DIY heat sinks and housings are almost done. Next thing is building the driver case for 4 MW drivers, the Sonoff timers and DC power meters to hang it outside the groom on the wall. Maybe I will integrate an Ilumi Meshtek controller when I can find the 4 channel 1-10v controller somewhere. .
Working slow leaves at least more time for improvements.
As soon as I have the permissions I'll upload a few pics..
The illumi product looks pretty good from the short amount of time I have seen it in action. I really like how it has the built in battery.
You had a pretty insane set up before hand so I'm keen to see what your next build is like.
I should get time in a few weeks to run a good thread about using IES files and Dialux.
I think I need to make some videos on other topics such as driver power factor and efficiency so people can see how it actually works in real life.
You had a pretty insane set up before hand so I'm keen to see what your next build is like.
I should get time in a few weeks to run a good thread about using IES files and Dialux.
I think I need to make some videos on other topics such as driver power factor and efficiency so people can see how it actually works in real life.
Find me on Instagram led_teknik
Great to see you expanding your horizons my friend...willkommen!Randomblame wrote: ↑Sat Jun 22, 2019 6:54 amWhat's up, my mongo frogs? Finally found the time to subscribe here.
@Teknik Sorry, bro! It was actually planned much earlier...
@Or_Gro, @Frank Cannon seems the gang is almost complete, lol!
Great to see you here buddy!Randomblame wrote: ↑Sat Jun 22, 2019 6:54 amWhat's up, my mongo frogs? Finally found the time to subscribe here.
@Teknik Sorry, bro! It was actually planned much earlier...
@Or_Gro, @Frank Cannon seems the gang is almost complete, lol!
I posted this on the “General” section, but ibet my riu buds haven’t even gone over there yet, so i’m posting in here, jic...
Hey dudes, i have one of these to measure and set height on my uvb tubes:
It works great, but price is $$$ for some people. So @chiefrunningphist on riu asked me to buy one of these (free app for i-phone/android), and compare to my meter:
Here is one of crp’s posts explaining his rationale:
I tested it under a single 4’ tube of these:
I let my light warm up for 15 mins, then ran the meters side-by-side, here’s what i got:
Line-of-best-fit (plug target uW/sq cm as “x”, tells you target UV Index value):
Hey dudes, i have one of these to measure and set height on my uvb tubes:
It works great, but price is $$$ for some people. So @chiefrunningphist on riu asked me to buy one of these (free app for i-phone/android), and compare to my meter:
Here is one of crp’s posts explaining his rationale:
I tested it under a single 4’ tube of these:
I let my light warm up for 15 mins, then ran the meters side-by-side, here’s what i got:
Line-of-best-fit (plug target uW/sq cm as “x”, tells you target UV Index value):