Or_Gro and the epic smackdown

The fruits of our labor. We welcome all types of plants, but grows posted here must be legal.
Or_Gro
LED Maniac
LED Maniac
Reactions:
Posts: 287
Joined: Fri Jun 21, 2019 10:54 am

Day:15: Gonna do some musical chairs, get the stragglers together for some dwc tlc...
C6E74391-1D36-4D2C-B12F-8529C60E5730.jpeg


After the music stopped:
45DA5CAA-406F-4FA1-91E1-B4DD217262D8.jpeg
Flushing the front right bucket for a few hours, then add nutes at half ec of other buckets...
Last edited by Or_Gro on Tue Jun 25, 2019 3:49 pm, edited 2 times in total.
Frank Cannon
LED Enthusiast
LED Enthusiast
Reactions:
Posts: 76
Joined: Thu Jun 20, 2019 11:18 am

I did sort of think that a dehumidifier might be hard work anyway as my tent is sucking in humid air from the shed so I would have to dehumidify half of the continent :shock: more fans it is then, strewth!

Nice mate, I dunno how you find time to do all this cob!
User avatar
LEDG
Site Admin
Reactions:
Posts: 1599
Joined: Sun Jun 04, 2017 8:15 pm

Or_gro, do you find your humidifier clogs up your carbon filter? Maybe you’re running RO in it but when I used an ultrasonic humidifier in my tent, I had to blow out my carbon filter periodically because it would be completely plugged with the white dust the humidifier was producing.
Want to Support the Site?

Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Or_Gro
LED Maniac
LED Maniac
Reactions:
Posts: 287
Joined: Fri Jun 21, 2019 10:54 am

LEDG wrote:
Tue Jun 25, 2019 3:00 pm
Or_gro, do you find your humidifier clogs up your carbon filter? Maybe you’re running RO in it but when I used an ultrasonic humidifier in my tent, I had to blow out my carbon filter periodically because it would be completely plugged with the white dust the humidifier was producing.
You know, this morning i opened my mama tent, a friggin fog bank hit me...felt my exhaust fan outer screen, seemed clogged....

I wouldn’t doubt that the issue is aerosol ppm...a big complaint about ultrasonics....additionally there are studies showing they aerosol microbes (health hazard), so gotta keep them clean.

How did you blow out your filter, especially w/o making a black mess?
User avatar
LEDG
Site Admin
Reactions:
Posts: 1599
Joined: Sun Jun 04, 2017 8:15 pm

Or_Gro wrote:
Tue Jun 25, 2019 3:39 pm
LEDG wrote:
Tue Jun 25, 2019 3:00 pm
Or_gro, do you find your humidifier clogs up your carbon filter? Maybe you’re running RO in it but when I used an ultrasonic humidifier in my tent, I had to blow out my carbon filter periodically because it would be completely plugged with the white dust the humidifier was producing.
You know, this morning i opened my mama tent, a friggin fog bank hit me...felt my exhaust fan outer screen, seemed clogged....

I wouldn’t doubt that the issue is aerosol ppm...a big complaint about ultrasonics....additionally there are studies showing they aerosol microbes (health hazard), so gotta keep them clean.

How did you blow out your filter, especially w/o making a black mess?
I just used an air compressor on low and the majority of the matter that came out of the filter was white and not black. Made a huge difference in flow.
Want to Support the Site?

Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
User avatar
Prawn Connery
LED Enthusiast
LED Enthusiast
Reactions:
Posts: 47
Joined: Thu Jun 06, 2019 6:54 am

Or_Gro wrote:
Tue Jun 25, 2019 12:55 pm
Prawn Connery wrote:
Tue Jun 25, 2019 7:20 am
Have a look at the spectrum of NS1 - the highest cannabinoid producing LED light:
Image
Nice prawndawg... but i think that NS1 looks more like.....

C0750379-E38E-469F-BB92-337BE8E61260.jpeg

;)
Nah, have a look at the 405-410 UVA on the NS1
User avatar
Prawn Connery
LED Enthusiast
LED Enthusiast
Reactions:
Posts: 47
Joined: Thu Jun 06, 2019 6:54 am

unkle_psycho wrote:
Tue Jun 25, 2019 10:56 am
Did you see the UV video from Seoul? They were getting results with very low levels of 285nm. They claimed you need 10x more power at 310nm to get the same results.

Now that I'm talking to you, do you still have any of those prawn boards? I have been looking at different solutions for high CRI, and really like the effort you guys put into this. Were planning on doing some side by sides with different spectrums, and these boards would definitely fit in.

I guess delivery from down under to scandinavia might be a bit of a bitch?
Hey mate, yeah I've got a few left and can organise postge to Europe. PM me if you like.
Or_Gro
LED Maniac
LED Maniac
Reactions:
Posts: 287
Joined: Fri Jun 21, 2019 10:54 am

LEDG wrote:
Tue Jun 25, 2019 4:46 pm
Or_Gro wrote:
Tue Jun 25, 2019 3:39 pm
LEDG wrote:
Tue Jun 25, 2019 3:00 pm
Or_gro, do you find your humidifier clogs up your carbon filter? Maybe you’re running RO in it but when I used an ultrasonic humidifier in my tent, I had to blow out my carbon filter periodically because it would be completely plugged with the white dust the humidifier was producing.
You know, this morning i opened my mama tent, a friggin fog bank hit me...felt my exhaust fan outer screen, seemed clogged....

I wouldn’t doubt that the issue is aerosol ppm...a big complaint about ultrasonics....additionally there are studies showing they aerosol microbes (health hazard), so gotta keep them clean.

How did you blow out your filter, especially w/o making a black mess?
I just used an air compressor on low and the majority of the matter that came out of the filter was white and not black. Made a huge difference in flow.
Thanks man!
User avatar
Chiefrunningphist
LED-Curious
LED-Curious
Reactions:
Posts: 21
Joined: Wed Jan 09, 2019 11:34 pm

I think that NS1 is close to a 5000k CRI 70 + 660nm + 405nm.

NS1...
Screenshot_2019-05-07-15-33-50~2.png
.

What I'm guessing, 5000k CRI70 + 660 + 405...
1561488672369.png
.

LM301B 5000K CRI70 / NS1 overlay...
1561487392092.png
.

The big jumbled mess...
1561488921148.png

Also... Some more UVI discussion here...
viewtopic.php?f=15&t=4405&p=16585#p16585
Last edited by Chiefrunningphist on Tue Jun 25, 2019 8:36 pm, edited 1 time in total.
Or_Gro
LED Maniac
LED Maniac
Reactions:
Posts: 287
Joined: Fri Jun 21, 2019 10:54 am

Frank Cannon wrote:
Tue Jun 25, 2019 2:14 pm
I did sort of think that a dehumidifier might be hard work anyway as my tent is sucking in humid air from the shed so I would have to dehumidify half of the continent :shock: more fans it is then, strewth!

Nice mate, I dunno how you find time to do all this cob!
Build a box around your tent, dehumidify that; or just seal up the shed...your wife will be happy you’re not buying lights...
Post Reply