A friendly LED grow light community.
https://ledgardener.com/forum/
more fans it is then, strewth!You know, this morning i opened my mama tent, a friggin fog bank hit me...felt my exhaust fan outer screen, seemed clogged....LEDG wrote: ↑Tue Jun 25, 2019 3:00 pmOr_gro, do you find your humidifier clogs up your carbon filter? Maybe you’re running RO in it but when I used an ultrasonic humidifier in my tent, I had to blow out my carbon filter periodically because it would be completely plugged with the white dust the humidifier was producing.
I just used an air compressor on low and the majority of the matter that came out of the filter was white and not black. Made a huge difference in flow.Or_Gro wrote: ↑Tue Jun 25, 2019 3:39 pmYou know, this morning i opened my mama tent, a friggin fog bank hit me...felt my exhaust fan outer screen, seemed clogged....LEDG wrote: ↑Tue Jun 25, 2019 3:00 pmOr_gro, do you find your humidifier clogs up your carbon filter? Maybe you’re running RO in it but when I used an ultrasonic humidifier in my tent, I had to blow out my carbon filter periodically because it would be completely plugged with the white dust the humidifier was producing.
I wouldn’t doubt that the issue is aerosol ppm...a big complaint about ultrasonics....additionally there are studies showing they aerosol microbes (health hazard), so gotta keep them clean.
How did you blow out your filter, especially w/o making a black mess?
Nah, have a look at the 405-410 UVA on the NS1Or_Gro wrote: ↑Tue Jun 25, 2019 12:55 pmNice prawndawg... but i think that NS1 looks more like.....Prawn Connery wrote: ↑Tue Jun 25, 2019 7:20 amHave a look at the spectrum of NS1 - the highest cannabinoid producing LED light:
C0750379-E38E-469F-BB92-337BE8E61260.jpeg
Hey mate, yeah I've got a few left and can organise postge to Europe. PM me if you like.unkle_psycho wrote: ↑Tue Jun 25, 2019 10:56 amDid you see the UV video from Seoul? They were getting results with very low levels of 285nm. They claimed you need 10x more power at 310nm to get the same results.
Now that I'm talking to you, do you still have any of those prawn boards? I have been looking at different solutions for high CRI, and really like the effort you guys put into this. Were planning on doing some side by sides with different spectrums, and these boards would definitely fit in.
I guess delivery from down under to scandinavia might be a bit of a bitch?
Thanks man!LEDG wrote: ↑Tue Jun 25, 2019 4:46 pmI just used an air compressor on low and the majority of the matter that came out of the filter was white and not black. Made a huge difference in flow.Or_Gro wrote: ↑Tue Jun 25, 2019 3:39 pmYou know, this morning i opened my mama tent, a friggin fog bank hit me...felt my exhaust fan outer screen, seemed clogged....LEDG wrote: ↑Tue Jun 25, 2019 3:00 pmOr_gro, do you find your humidifier clogs up your carbon filter? Maybe you’re running RO in it but when I used an ultrasonic humidifier in my tent, I had to blow out my carbon filter periodically because it would be completely plugged with the white dust the humidifier was producing.
I wouldn’t doubt that the issue is aerosol ppm...a big complaint about ultrasonics....additionally there are studies showing they aerosol microbes (health hazard), so gotta keep them clean.
How did you blow out your filter, especially w/o making a black mess?
Build a box around your tent, dehumidify that; or just seal up the shed...your wife will be happy you’re not buying lights...Frank Cannon wrote: ↑Tue Jun 25, 2019 2:14 pmI did sort of think that a dehumidifier might be hard work anyway as my tent is sucking in humid air from the shed so I would have to dehumidify half of the continent
Nice mate, I dunno how you find time to do all this cob!