Results from my EB GEN 2 Strips and an atreum board Grow
Posted: Wed Oct 24, 2018 1:09 am
I wanted to thank sdfoster22 and Ledgardener for helping me better understand how to safely and correctly put together a quality DIY LED grow light. I also wanted to show off the results from the grow with the bridgelux strip build . Used the drivers from the meizhi blurples I had from my first grow and converted them to led strips.
Harvested them at week 9 and are currently hanging to dry.
I grew them in a 3' x 2-1/2' DIY tent in various sized pots ranging from 1 quart, 1 gallon, and 3 gallon pots because those were what I had and I ran out of my growing medium which was coco coir. I also didn't want to transplant them to larger pots. For nutrients I used Coco Canna A + B to start and when I ran out of that I switched to Megacrop at about week 2 of 12/12 flip to flower I believe.
These were clones from my first grow which were OG Kush and White Widow. I also had another clone I acquired of a Purple Trainwreck X Goo.
The 2 eb gen 2 strip builds ran at 200W in total while the atreum board which sat in the middle was set at 40W for a total of 240W for my 3' X 2.5' space.
Thanks for all the help!
Harvested them at week 9 and are currently hanging to dry.
I grew them in a 3' x 2-1/2' DIY tent in various sized pots ranging from 1 quart, 1 gallon, and 3 gallon pots because those were what I had and I ran out of my growing medium which was coco coir. I also didn't want to transplant them to larger pots. For nutrients I used Coco Canna A + B to start and when I ran out of that I switched to Megacrop at about week 2 of 12/12 flip to flower I believe.
These were clones from my first grow which were OG Kush and White Widow. I also had another clone I acquired of a Purple Trainwreck X Goo.
The 2 eb gen 2 strip builds ran at 200W in total while the atreum board which sat in the middle was set at 40W for a total of 240W for my 3' X 2.5' space.
Thanks for all the help!