Appreciate the explanations, it cleared up a lot.
I am taking your advice and am going to go with a slightly bigger driver to allow for expansion if needed at a later date.
Thinking about going with this, if you guys could confirm it would work?
I know you said get the "B" version as it allows dimming with a screw driver rather than a more complicated way, can you confirm if this is the right one as it has "AB" rather than just "B"?
https://www.mouser.co.uk/ProductDetail/ ... b2YZLJn5Fs
Building first LED to cover 1 sq ft grow space
Either that’s a typo, or it’s some sort of custom dimming option Fromm mean well. I’d say it’s a typo. Unfortunately I can’t tell which style it really is.Seshwan wrote: ↑Tue Oct 17, 2017 7:32 amAppreciate the explanations, it cleared up a lot.
I am taking your advice and am going to go with a slightly bigger driver to allow for expansion if needed at a later date.
Thinking about going with this, if you guys could confirm it would work?
I know you said get the "B" version as it allows dimming with a screw driver rather than a more complicated way, can you confirm if this is the right one as it has "AB" rather than just "B"?
https://www.mouser.co.uk/ProductDetail/ ... b2YZLJn5Fs
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
- LED-Curious
- Reactions:
- Posts: 9
- Joined: Sat Sep 16, 2017 1:13 am
Isn't the A driver the one that's adjustable with a screw driver. The B driver has to be connected to a potentiometer, right?admin wrote: ↑Tue Oct 17, 2017 3:09 pmEither that’s a typo, or it’s some sort of custom dimming option Fromm mean well. I’d say it’s a typo. Unfortunately I can’t tell which style it really is.Seshwan wrote: ↑Tue Oct 17, 2017 7:32 amAppreciate the explanations, it cleared up a lot.
I am taking your advice and am going to go with a slightly bigger driver to allow for expansion if needed at a later date.
Thinking about going with this, if you guys could confirm it would work?
I know you said get the "B" version as it allows dimming with a screw driver rather than a more complicated way, can you confirm if this is the right one as it has "AB" rather than just "B"?
https://www.mouser.co.uk/ProductDetail/ ... b2YZLJn5Fs
You bet. This one has both letters at the end though!microgroaway wrote: ↑Wed Oct 18, 2017 1:42 pmIsn't the A driver the one that's adjustable with a screw driver. The B driver has to be connected to a potentiometer, right?admin wrote: ↑Tue Oct 17, 2017 3:09 pmEither that’s a typo, or it’s some sort of custom dimming option Fromm mean well. I’d say it’s a typo. Unfortunately I can’t tell which style it really is.Seshwan wrote: ↑Tue Oct 17, 2017 7:32 amAppreciate the explanations, it cleared up a lot.
I am taking your advice and am going to go with a slightly bigger driver to allow for expansion if needed at a later date.
Thinking about going with this, if you guys could confirm it would work?
I know you said get the "B" version as it allows dimming with a screw driver rather than a more complicated way, can you confirm if this is the right one as it has "AB" rather than just "B"?
https://www.mouser.co.uk/ProductDetail/ ... b2YZLJn5Fs
Want to Support the Site?
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
Use this Amazon referral link and any purchase you make within 24 hrs will earn LEDgardener a commission at no cost to you!
-
- LED-Curious
- Reactions:
- Posts: 9
- Joined: Sat Sep 16, 2017 1:13 am
Oh, I missed that, sorry. I saw that the spec sheet said AB, but just assumed that the driver had one or the other.admin wrote: ↑Wed Oct 18, 2017 1:53 pmYou bet. This one has both letters at the end though!microgroaway wrote: ↑Wed Oct 18, 2017 1:42 pmIsn't the A driver the one that's adjustable with a screw driver. The B driver has to be connected to a potentiometer, right?
Thanks guys, I will speak to the technical support on mouser.co.uk and see if they can shed some light. Will be sure to report back!
Just in case anyone knows, what wiring/connectors would I need to get these strips wired up to this driver? Hoping to not have to do any soldering if I can get away with it
Just in case anyone knows, what wiring/connectors would I need to get these strips wired up to this driver? Hoping to not have to do any soldering if I can get away with it