Long story short :
Have (5) MeanWell HLG-150H-48AB drivers.
Will be ordering cutter 90cri strips probably tomorrow, (12) 2700K and (8) 4000K to sit on heatsinkusa .601" sinks.
So it only 2 things are left
1) Stop me from making a bad decision. Seems like these strips are my best options for entry level price/performance? Wanted to check out 90cri, been to 80cri Qb288 grows but coming straight from screw in led bulbs myself.
2) Supplementary lighting. I saw tekniks' post suggesting uv leds from cutter and if it's not too expensive vs. a reptile light I'll build some uv and some far red, but does anyone else have any suggestions as to what else to add based on the 2.7/4k 90cri strips? Looks like plenty of 660 and in a good ratio to the 720 for 2.7? Or just a cost effective way to get started dabbling even? Love building circuits and soldering, suggestions welcome.
I'll leave this part from the first attempt:
And really, thanks again, even if I get no help right here, I've learned an awful lot from you all already, both here and on riu/around the net. But here is where you've made a great community I look forward to being a part of. Maybe even be able to contribute something someday (got something planned for cheap scheduled dimming/power)
![Smile :)](./images/smilies/icon_e_smile.gif)
-J