Damn thats pretty rough. Crazy how much climate varies...
Do you have any tricks against mold? I had a really moist autumn some years back, and I was the only one in my group of friends (sharing genetics) who didn't have much problem with mold (outside) in denser buds.
The things I did that my friends did not was first spray the plants with chaga tea, to raise ph, plus chaga is pretty much anti everything. Then I sprayed the plants with MSM, because I noticed many commercial farmers use sulfur.
Now I.ve been reading about cinnamon water, I'm about to test that on a few peat pots that seemed to mold in the incubator
Peltier Light Cooling
-
- LED Wizard
- Reactions:
- Posts: 1537
- Joined: Fri Apr 27, 2018 1:49 pm
"Nothing is true, everything is permitted"
-
- LED Lover
- Reactions:
- Posts: 101
- Joined: Sat May 12, 2018 5:12 am
I have some potassium carbonate-based solution for killing mould, but I'm not sure how well it works. I've been concentrating on trying to control humidity instead, since it seems like that's the best way to fight mould.unkle_psycho wrote: ↑Sun Jun 10, 2018 1:01 pmDamn thats pretty rough. Crazy how much climate varies...
Do you have any tricks against mold? I had a really moist autumn some years back, and I was the only one in my group of friends (sharing genetics) who didn't have much problem with mold (outside) in denser buds.
The things I did that my friends did not was first spray the plants with chaga tea, to raise ph, plus chaga is pretty much anti everything. Then I sprayed the plants with MSM, because I noticed many commercial farmers use sulfur.
Now I.ve been reading about cinnamon water, I'm about to test that on a few peat pots that seemed to mold in the incubator
-
- LED Wizard
- Reactions:
- Posts: 1537
- Joined: Fri Apr 27, 2018 1:49 pm
I had some friends who had 12y of experience breeding outside. They had lots of mold issues. When talking with them I realized they hadn't even bothered to check the mold strains that they were struggling with. In Finland's case that narrowed things down to 3 likely strains, and the guys were easily able to identify them from photos.
Don't know if there are many more strains to worry about inside, but after identifying the strain, I found lots of specific information I was able to leverage... like the PH environment that the particular mold liked (acid).
Don't know if there are many more strains to worry about inside, but after identifying the strain, I found lots of specific information I was able to leverage... like the PH environment that the particular mold liked (acid).
"Nothing is true, everything is permitted"