Page 4 of 7
Re: IT'S ALIVE!!!!
Posted: Mon May 21, 2018 5:10 pm
by Professor Xavier
Do you journal JGG? I'd like to follow your work
I also think growing with so much high CRI light is an entirely different ball game than most have been playing with up until recently and carries it's own unique challenges and rewards.
Xtreme Lighting Horticulturalists gotta stick together while we forge ahead and light the way.
Re: IT'S ALIVE!!!!
Posted: Tue May 22, 2018 4:49 am
by Jolly Green Giant
unkle_psycho wrote: ↑Mon May 21, 2018 6:54 am
Is that running mixed phenos, or clones? How much penetration do you get?
that 2 gpw was the last clone run of my buddies sweet tooth ( it's a higher yielder) half 3 part jungle juice. half my first no till attempt.. some how It went off without a hiccup first time
I had solid small nugs 4' from my light ( a good 2 1/2 - 3 feet down thru canopy) everything looked smaller than what I was use to seeing.. but weighed out heavier due to the LEDs
I was guessing 1.3 maybe by what size I was use to seeing.. I'm glad I was wrong
Re: IT'S ALIVE!!!!
Posted: Tue May 22, 2018 9:37 am
by unkle_psycho
4 foot? thats pretty crazy.... Now that I put my strips I'm pretty surprised at both the density and the penetration.
Re: IT'S ALIVE!!!!
Posted: Wed May 23, 2018 2:08 am
by Jolly Green Giant
Professor Xavier wrote: ↑Mon May 21, 2018 5:10 pm
Do you journal JGG? I'd like to follow your work
I also think growing with so much high CRI light is an entirely different ball game than most have been playing with up until recently and carries it's own unique challenges and rewards.
Xtreme Lighting Horticulturalists gotta stick together while we forge ahead and light the way.
nah no journals... technically my state says can't do your own.. why I'm glad I have indoor tomatoes!
Re: IT'S ALIVE!!!! ( version 1.2 )
Posted: Tue May 29, 2018 2:12 am
by Jolly Green Giant
UPDATE version 1.2
after running the good old 4 288 v1's 3500k.... with slate 1 maxi pad heat sinks... on a RapidLED 4x4 substrate... using a hlg480h-c2100b driver for almost a year... I finally did a upgrade! I added 2 more boards. swapped drivers, and changed the framework. it's now version 1.2..
4 288 v 1 3500k boards in the corners. 2 288 v 1 2700k boards in the middle..
driver was swapped to a hlg-480h-54b
framework is now 3/4 x 3/4 x 1/8 T6061 angle aluminium.. with a 1/4 x 3" eyebolt in the corners and number 8# machine screws and nuts everywhere else.. the over all size is 38" x 40".. with the spacing so another slate 1 heatsink could fit in between.
it's lighter... easier to manage solo.... my poor little slate 1's don't run as hot... and my efficacy went up running them at 1500ma instead of 2100!!
yeah.. same old poopy pictures from old p.o.s. tablet!
I'm also sexing "tomato" plants atm!!
Re: IT'S ALIVE!!!! ( version 1.2 )
Posted: Tue May 29, 2018 3:32 pm
by Sativant
Nice upgrade, JGG !
Re: IT'S ALIVE!!!! ( version 1.2 )
Posted: Tue May 29, 2018 8:41 pm
by LEDG
Beautiful!
Re: IT'S ALIVE!!!! ( version 1.2 )
Posted: Fri Jun 08, 2018 1:56 pm
by Tune
Nice upgrade man.
I bought myself 16 Cree CXB 3590 3500K CD bins on 4 Meanwell HLG 185 C1400 drivers.
My first run with these I had 1,016KG of nugs and 35gr fluff.
Whats that in LBS? 2.2 Lbs? And a bit more than an ounce of fluff.
Now a summerstop and end of august round 2 with some nice old dutch clones.
Re: IT'S ALIVE!!!! ( version 1.2 )
Posted: Fri Jun 08, 2018 3:57 pm
by LEDG
Had to do a double take and then I remembered you guys use commas as periods for numbers like that.
Re: IT'S ALIVE!!!! ( version 1.2 )
Posted: Fri Jun 08, 2018 7:39 pm
by Tune
Euhhh..yes sorry 'bout the metric system