Page 1 of 1

Opinions on these lights

Posted: Sat Jul 20, 2019 2:36 am
by Espigrow
Need a light for a 2x2 been looking at these
1 chilled logic buck 100w
1 Qb 288 rspec 135w
2 atreum- 20 bars 120 w

Which do y’all recommend? they all look good and around same price point around 160-190

Re: Opinions on these lights

Posted: Sat Jul 20, 2019 3:02 am
by TEKNIK
Are you using it for a VEG light? Or a small area?

Re: Opinions on these lights

Posted: Sat Jul 20, 2019 3:49 am
by Espigrow
It will veg my photos and grow one auto in a small 2x2

Re: Opinions on these lights

Posted: Sat Jul 20, 2019 9:07 am
by TEKNIK
I would probably go the Rspec out of those 3 choices, the atrium would be a good one also. The puck would have poor spread

Re: Opinions on these lights

Posted: Sat Jul 20, 2019 3:03 pm
by Espigrow
Thanks for the advice I could see what U mean sensed the puck is much smaller out of the 3

Re: Opinions on these lights

Posted: Mon Jul 22, 2019 12:37 am
by TEKNIK
Or_Grow did a really good grow journal comparing QB96s from HLG and quantum boards, he kept par as close as possible, the winner ended up being the quantum boards and I put that down to spread.
Larger surface areas and more leds spread out really do seem to make a significant impact

Re: Opinions on these lights

Posted: Mon Jul 22, 2019 6:00 pm
by Espigrow
Interesting I'll see if I can find that post and take a look at it

Re: Opinions on these lights

Posted: Mon Jul 22, 2019 6:33 pm
by TEKNIK
https://www.rollitup.org/t/epic-4x4-flo ... 8s.982881/

Here it is, what is interesting is how it looked like the QB96s were going to win all the way until the end, to me it seemed like the extra spread made the difference as everything else was pretty much the same all the way through

Re: Opinions on these lights

Posted: Tue Jul 23, 2019 6:25 pm
by Greenery Bob
@TEKNIK
Do you have any links to lights that you or your company makes and sells?

Re: Opinions on these lights

Posted: Tue Jul 23, 2019 7:30 pm
by TEKNIK
Greenery Bob wrote:
Tue Jul 23, 2019 6:25 pm
@TEKNIK
Do you have any links to lights that you or your company makes and sells?
Not at the right now mate, give me a couple more months to conduct some more tests, I am going to have some pretty unique products, mainly in the mid price range.
I really want to compeate with bridgelux gen3 in a low price range too.
Cutter sell a few of the custom LED chips I make such as PC red at the moment.