Brand n[ew]oob project!
Posted: Wed May 16, 2018 1:14 am
one closet 29x96
double thick cardboard light barrier W/cardboard tube light trap divides, housing moms(1 QB1204K, HLG-40H-24B in progress), veg. area(2 QB120's4K, HLG-80H-48B), cloning(1 QB964K HLG-40H-24B), 30gal. collection barrel+10 gal extension rest. attached through the wall to a twenty gal. totaling thirty gal. for a 24"x44" ebb flow in hydroton
shelving leaves no foot print, , detaches and adjusts as needed, has slots underneath, meant for drawers, the QB's slide right into, common material Home Depot
Ahhhh the lighting...three QB 288's3K slate 2, HLG-320H-1750B, sink used as a foundation for mounting 44" heat sinks(heatsink USA 2.08" and 1.1"), holding 74 total discrete's(Rapidquick connect w/ Burquist heat pads, for future fine tuning), HLG-185H-700B.
20 cree XPG-3 royal blue top bin, RapidLed
16 cree XPE-2 red top bin, Rapid
8 cree photo red top bin, Rapid
6 IR's
8 UVA's
390-400, 400-410, 410-420, 420-430,...4 of each distributed total 16
salvaged aluminum plate holds remote driver controls(in progress), red rocker switches (Home Depot) POTS, Split body aluminum job Box(amazon)
space is side light wrapped with 6 QB 96's4K, HLG-320H-1750B in series
PAR readings around the perimeter are dramatically raised as the 96's ramp up, 1000ish@1750 4" away...Cant see how this wouldn't increase quality and quantity down low...the corners, usually a cold spot, are doubly effected...plants in the corners are receiving good density(photon)from two sides...more to come!..and thanks for the help!
20 cree XPG-3 royal blue top bin, RapidLed
16 cree XPE-2 red top bin, Rapid
8 cree photo red top bin, Rapid
6 IR's
8 UVA's
390-400, 400-410, 410-420, 420-430,...4 of each distributed total 16
PAR readings around the perimeter are dramatically raised as the 96's ramp up, 1000ish@1750 4" away...Cant see how this wouldn't increase quality and quantity down low...the corners, usually a cold spot, are doubly effected...plants in the corners are receiving good density(photon)from two sides...more to come!..and thanks for the help!