Trying to build a UV exposure box for Platinum Printing photography
Posted: Tue Jun 25, 2019 3:45 pm
I've been reading/watching the great content here for my gardening needs and I'm going to do my first DIY LED build for the garden shortly. But, I'd also like to look into building a LED exposure box for my photography. I know they can be built using LED Black light strips/ribbon, but the coating yellow over time, but hope that there are board or strip option I could use. And after reading about how powerful grow lights can be, I'm hoping I could build a box that would also have shorter exposure times.
The UV range I would need to target is around 350nm to 420nm, about the range of BL, BLB, Aqua, or Super Actinic fluorescent bulbs. Here's a link to an in depth explanation that does a better job than I could here.
https://sandykingphotography.com/resour ... r-printing
I'm still wrapping my head around building and driving LED lights, but I'd like know if this would be doable.
Thanks
The UV range I would need to target is around 350nm to 420nm, about the range of BL, BLB, Aqua, or Super Actinic fluorescent bulbs. Here's a link to an in depth explanation that does a better job than I could here.
https://sandykingphotography.com/resour ... r-printing
I'm still wrapping my head around building and driving LED lights, but I'd like know if this would be doable.
Thanks