LEDgardener

Video.

Marine2143 wrote: ↑

Tue May 21, 2019 7:31 pm

Video.

Looks like they are using the illumi meshtek system. They are going to be very popular for control

and they still don't tell you what diodes they used... 3.0 u mole/j? maybe if it's on minimal power setting.. at least it's not like their out of date cob and Blurple junk...

From their spread sheet I calculate an efficiency on 2,647umol/w... so definitely the 3.0 is dimmed down

Do these lights have like some crazy optics or something? keeping them pretty far from the canopy

Aloha & They are using the Osram chips. .

unkle_psycho wrote: ↑

Wed May 22, 2019 3:06 pm

From their spread sheet I calculate an efficiency on 2,647umol/w... so definitely the 3.0 is dimmed down

Do these lights have like some crazy optics or something? keeping them pretty far from the canopy

Aloha & californialightworks is running 2 channels, red and white. The Osram high end research LEDs have six. https://www.osram.com/pia/phytofy-resea ... /index.jsp

Nice light, still wondering if they are using special optics in these high mounted applications.

unkle_psycho wrote: ↑

Wed May 22, 2019 7:51 pm

Nice light, still wondering if they are using special optics in these high mounted applications.

You can see the spread on the wall behind the light, seems to be 60 degree or tighter optics.

Aloha & I called californialightworks today. They are not using the Osram Photofy software. The price with 2 channel software and light is $799. ($2.35 a watt) They did not know what the Kevin of the white leds they are using. I am hoping the lottery comes in for me so I can get up to date.