Quantum Board QB288 with Trolmaster Hydro X controller.
Posted: Fri Aug 23, 2019 11:27 pm
So I've been trying to do some research about qb's and I think I'm close but I have a few questions and I would love your help.
So I'm trying to put 6 qb288's over a 5x5 space. I plan to run the boards in series, each board with it's own slate 2 heat sink, hoping for 120-140w/Board. I originally ordered 2 of these drivers - HLG-480H-C2800A, when I was oblivious to the needs of light controllers. I know I'll need the 0-10v lighting controller with my hydrox, as well as an rj12 to 3.5 adapter. I plan to return the drivers I bought previously so I wanted some opinions on what drivers would be good for my situation. The fewer drivers the better so long as they aren't significantly more expensive, I plan to have 4 of these 6 board fixtures in a room in the next few months. Would 3 ESD-320S310DT, 2 boards in series per driver, be a good option?
Thanks in advance,
Urban Herbman
So I'm trying to put 6 qb288's over a 5x5 space. I plan to run the boards in series, each board with it's own slate 2 heat sink, hoping for 120-140w/Board. I originally ordered 2 of these drivers - HLG-480H-C2800A, when I was oblivious to the needs of light controllers. I know I'll need the 0-10v lighting controller with my hydrox, as well as an rj12 to 3.5 adapter. I plan to return the drivers I bought previously so I wanted some opinions on what drivers would be good for my situation. The fewer drivers the better so long as they aren't significantly more expensive, I plan to have 4 of these 6 board fixtures in a room in the next few months. Would 3 ESD-320S310DT, 2 boards in series per driver, be a good option?
Thanks in advance,
Urban Herbman