1)What's the wattage on a 4 foot strip
2) what type of heat sync will we need
3) how soon can I order some?!
1) 4-foot will be 120W, 2-foot will be 60W. We may release future variants with different spectrums & power, depending on demand and feedback.
2) These will come with a fitted heatsink, so you don't need to worry about it. We're making a custom extrusion die for this.
3) Will be releasing this and other details soon =) There's still work to left to do, but we are excited about these!
How much ultraviolet <400 nm light does the light put out? I've read lots about THC production in cannabis being higher if you add UV light to the plant. What are your thoughts on this?
What spacing do you recommend between multiple units for full blanket coverage at that 650 PAR in your testing picture? At what height did you have the sensor also please?
1)What's the wattage on a 4 foot strip
2) what type of heat sync will we need
3) how soon can I order some?!
1) 4-foot will be 120W, 2-foot will be 60W. We may release future variants with different spectrums & power, depending on demand and feedback.
2) These will come with a fitted heatsink, so you don't need to worry about it. We're making a custom extrusion die for this.
3) Will be releasing this and other details soon =) There's still work to left to do, but we are excited about these!
I’m loving my boards, I can’t wait to see what the strips are going to do. Check out my Atreum/HLG600/Solacure/Sonoff build for a link to my garden this far. I’m a Atreum customer for life.
We've been busy the past couple weeks getting designs finalized, components manufactured, and assembly under way. Our goal here is to simplify strip builds, and I'm super excited to share a couple highlights of the design:
Comes in 4-ft and 2-ft versions (1154mm and 594mm, to be exact)
4-ft version is rated at 120W (2.3A @ 52V), 2-ft version is 60W (1.15A @ 52V). These are matched for the Meanwell HLG-120H-54 and HLG-60H-54, respectively.
The spectrum is 4000K + 660nm deep-red supplementation. CRI is 90+. The light output is gorgeous!
Custom-extruded heatsink, matched to the strip. By custom, I mean we did the thermal analysis, designed the profile, made an extrusion die, and machined in all mounting holes. We also include brackets to hang each strip individually, or mount to a rail.
Comes pre-assembled with a 2-foot pigtail, ready to plug and play
This look awesome. I just ordered 2x 288.2 boards on friday. Wish I would have waited a bit. Oh well I'll give them a consider on my next project. Keep up the good work