new 2 channel cutter strip

[grisbi]

new strip board with 2 channels for supplementing the 272, can be 12 led in series or 2 channels of 6 for XP size leds


hello guyz!! i might need your help on doing my emmerson effect / uv strip for cannabis grow

those strip gonna work with 12 x 3535 led format, and that is amazing!!
first you can use those strip to put in the new cree xpe2 and we will can use the @TEKNIK pc red and pc blue led!!!


for the moment i will need UV and 730 emmerson effect strip to complet my setup:

so its gonna be 6 x cree xpe2 730nm + 6 uv led

i need you guyz to make me the best uv led cocktail for canabis grow, i dont know a lot about uv led, that why im asking here!
cheers

[TEKNIK]

No one knows for sure the best combination of UV, probably try at least 6 different types

[grisbi]

No one knows for sure the best combination of UV, probably try at least 6 different types

oh my god, im going to study that hard, to find the right coktail....
have to first make like of the 3535 uv led on the market

[TEKNIK]

Cutter have the good ones from semileds. I would run a 430X2,420, 400X2, 385

[grisbi]

Cutter have the good ones from semileds. I would run a 430X2,420, 400X2, 385

ok my friend i studdy the stuff little bit to be soft:
285 nm LED is proven to elevate secondary metabolites, as well as mold elimination and pest control.
Learn More

365 nm LED increases plants’ response to 285 nm and helps further elevate terpenes.


so im going to do strip 2 channel:
1st:
3 x 285nm + 3 x 365nm

2nd channel:
6 x cree xpg3 730nm

will be able to make properly the emerson effect + uva/b
i work so much lately!
will finish finaly my setup en start my grow

[TEKNIK]

Cutter have the good ones from semileds. I would run a 430X2,420, 400X2, 385

ok my friend i studdy the stuff little bit to be soft:
285 nm LED is proven to elevate secondary metabolites, as well as mold elimination and pest control.
Learn More

365 nm LED increases plants’ response to 285 nm and helps further elevate terpenes.


so im going to do strip 2 channel:
1st:
3 x 285nm + 3 x 365nm

2nd channel:
6 x cree xpg3 730nm

will be able to make properly the emerson effect + uva/b
i work so much lately!
will finish finaly my setup en start my grow

You can not run 285nm with other LEDs. They need to be separate

[Marine2143]

Aloha TEKNIK & This looks like an interesting conference.https://www.wur.nl/upload_mm/c/2/f/79bb ... en_R11.pdf

[grisbi]

Cutter have the good ones from semileds. I would run a 430X2,420, 400X2, 385

ok my friend i studdy the stuff little bit to be soft:
285 nm LED is proven to elevate secondary metabolites, as well as mold elimination and pest control.
Learn More

365 nm LED increases plants’ response to 285 nm and helps further elevate terpenes.


so im going to do strip 2 channel:
1st:
3 x 285nm + 3 x 365nm

2nd channel:
6 x cree xpg3 730nm

will be able to make properly the emerson effect + uva/b
i work so much lately!
will finish finaly my setup en start my grow

You can not run 285nm with other LEDs. They need to be separate

hello @TEKNIK hope your doing well??
even with some ledil optic you cannot run 285nm?

[grisbi]

Aloha TEKNIK & This looks like an interesting conference.https://www.wur.nl/upload_mm/c/2/f/79bb ... en_R11.pdf

hello sir @Marine2143 ....
am asking that gently.... are you a bot?
we are speaking about uv led and you are putting me straight a link that is not connected to my tread.....

[TEKNIK]

285nm will damage everything around it including the optics. It also does not last as long as the others.
It is best to have 285nm on its own, even 365nm will damage most optics, not sure if the ledil optics are suits for 365nm also.
365nm is really bad for your eyes so make sure you have them turned off when in the grow room