new strip board with 2 channels for supplementing the 272, can be 12 led in series or 2 channels of 6 for XP size leds
hello guyz!! i might need your help on doing my emmerson effect / uv strip for cannabis grow
those strip gonna work with 12 x 3535 led format, and that is amazing!!
first you can use those strip to put in the new cree xpe2 and we will can use the @TEKNIK pc red and pc blue led!!!
for the moment i will need UV and 730 emmerson effect strip to complet my setup:
so its gonna be 6 x cree xpe2 730nm + 6 uv led
i need you guyz to make me the best uv led cocktail for canabis grow, i dont know a lot about uv led, that why im asking here!
cheers
new 2 channel cutter strip
ok my friend i studdy the stuff little bit to be soft:
285 nm LED is proven to elevate secondary metabolites, as well as mold elimination and pest control.
Learn More
365 nm LED increases plants’ response to 285 nm and helps further elevate terpenes.
so im going to do strip 2 channel:
1st:
3 x 285nm + 3 x 365nm
2nd channel:
6 x cree xpg3 730nm
will be able to make properly the emerson effect + uva/b
i work so much lately!
will finish finaly my setup en start my grow
You can not run 285nm with other LEDs. They need to be separategrisbi wrote: ↑Mon Jul 08, 2019 2:47 pmok my friend i studdy the stuff little bit to be soft:
285 nm LED is proven to elevate secondary metabolites, as well as mold elimination and pest control.
Learn More
365 nm LED increases plants’ response to 285 nm and helps further elevate terpenes.
so im going to do strip 2 channel:
1st:
3 x 285nm + 3 x 365nm
2nd channel:
6 x cree xpg3 730nm
will be able to make properly the emerson effect + uva/b
i work so much lately!
will finish finaly my setup en start my grow
Find me on Instagram led_teknik
-
- LED Maniac
- Reactions:
- Posts: 328
- Joined: Sat Nov 10, 2018 9:10 pm
Aloha TEKNIK & This looks like an interesting conference.https://www.wur.nl/upload_mm/c/2/f/79bb ... en_R11.pdf
hello @TEKNIK hope your doing well??TEKNIK wrote: ↑Mon Jul 08, 2019 8:54 pmYou can not run 285nm with other LEDs. They need to be separategrisbi wrote: ↑Mon Jul 08, 2019 2:47 pmok my friend i studdy the stuff little bit to be soft:
285 nm LED is proven to elevate secondary metabolites, as well as mold elimination and pest control.
Learn More
365 nm LED increases plants’ response to 285 nm and helps further elevate terpenes.
so im going to do strip 2 channel:
1st:
3 x 285nm + 3 x 365nm
2nd channel:
6 x cree xpg3 730nm
will be able to make properly the emerson effect + uva/b
i work so much lately!
will finish finaly my setup en start my grow
even with some ledil optic you cannot run 285nm?
hello sir @Marine2143 ....Marine2143 wrote: ↑Mon Jul 08, 2019 9:14 pmAloha TEKNIK & This looks like an interesting conference.https://www.wur.nl/upload_mm/c/2/f/79bb ... en_R11.pdf
am asking that gently.... are you a bot?
we are speaking about uv led and you are putting me straight a link that is not connected to my tread.....
285nm will damage everything around it including the optics. It also does not last as long as the others.
It is best to have 285nm on its own, even 365nm will damage most optics, not sure if the ledil optics are suits for 365nm also.
365nm is really bad for your eyes so make sure you have them turned off when in the grow room
It is best to have 285nm on its own, even 365nm will damage most optics, not sure if the ledil optics are suits for 365nm also.
365nm is really bad for your eyes so make sure you have them turned off when in the grow room
Find me on Instagram led_teknik