I'm a pretty sure that Kathod has some UV optics. Maybe take a look at them, I usually find that Kathod does a bit more research than ledil.
Both companies have awesome products though
new 2 channel cutter strip
-
- LED Maniac
- Reactions:
- Posts: 328
- Joined: Sat Nov 10, 2018 9:10 pm
Aloha & I am not a bot my friend. I am a long time grower from Hawaii where we have high uv levels. " i need you guyz to make me the best uv led cocktail for canabis grow, i dont know a lot about uv led, that why im asking here!grisbi wrote: ↑Mon Jul 08, 2019 9:37 pmhello sir @Marine2143 ....Marine2143 wrote: ↑Mon Jul 08, 2019 9:14 pmAloha TEKNIK & This looks like an interesting conference.https://www.wur.nl/upload_mm/c/2/f/79bb ... en_R11.pdf
am asking that gently.... are you a bot?
we are speaking about uv led and you are putting me straight a link that is not connected to my tread.....
cheers"
-
- LED Maniac
- Reactions:
- Posts: 328
- Joined: Sat Nov 10, 2018 9:10 pm
Dennis Brown has been a leader in UV for years. The science is evolving at a rapid rate with LED and the work at SETI and Dr. Barber.https://www.solacure.com/hydromag1.html?viewfullsite=1
You cannot put interview from a commercial website ... loool its not objectiv at allMarine2143 wrote: ↑Mon Jul 08, 2019 10:10 pmDennis Brown has been a leader in UV for years. The science is evolving at a rapid rate with LED and the work at SETI and Dr. Barber.https://www.solacure.com/hydromag1.html?viewfullsite=1
Do they say the range of UV they are suitable for? I wouldn't use an optic on 285nm, for 365 those lenses should be fine. Choose the widest beam angle where possible as the rest of you build is strips
Find me on Instagram led_teknik
hello sir , theire is no link at the moment, i saw the link in other forum, and asked theire boss to make me special strip.
the answer was:
"I will need to find 285nm as I dont know of one in xp(3535) led footprint . unless you know one"
i still have to found that. or i will swap the 285nm spectrum :'(
-
- LED Wizard
- Reactions:
- Posts: 1537
- Joined: Fri Apr 27, 2018 1:49 pm
I guess with 100mA in, and 10mw out theres so little power that there wont be too much heat?
"Nothing is true, everything is permitted"