I'm trying to put together a setup using strips (2' 3' or 4') to replace T5s for a shelf setup. Shelf is 24"x40"x72". 3 shelves Would like to use strips. Could anyone offer build advice? I'm a newb and don't know a ton about voltage/wattage, corresponding drivers...etc.
Ideally I could get 1 driver (dimmable) to power 3 sets of (2) 2' strips. (or 3 single 4' strips)
I've seen Sun Board 96 LM561 or LM 301b on eBay for reasonable prices. Some listings include a compatible driver.
If I''ve missed good threads to follow please link to them. Otherwise any advice on building a system to suit my needs is most welcome!
Shelf setup using strips for VEG microgreens seedlings clones
I have a new waterproof product that will be released at the end of this month that is really good for these applications also, 4000k CRI95
Mine will cost a little more than a normal strip but I believe it is well worth it
Maybe take a look at my Instagram to get an idea of the product as I'm displaying some of the trials that are going on around the world on there
Led_teknik on Instagram
Find me on Instagram led_teknik
-
- LED-Curious
- Reactions:
- Posts: 6
- Joined: Thu Apr 30, 2020 4:28 pm
Ended up getting some 6500k 96 Samsung lm301b strips, sinks & a driver.
(4) 15" strips
(2) 36" heatsinks
angle alum
Meanwell HLG-150H-48A
Will be putting it all together this wkd and will report back. Thinking all 4 on one shelf, but might be able to run them separate... not sure.
I have t5 fixtures w/ led bulbs, but find the 3-4" is takes up valuable headspace, I can likely cut that to 1-2" w/ led strips...
(4) 15" strips
(2) 36" heatsinks
angle alum
Meanwell HLG-150H-48A
Will be putting it all together this wkd and will report back. Thinking all 4 on one shelf, but might be able to run them separate... not sure.
I have t5 fixtures w/ led bulbs, but find the 3-4" is takes up valuable headspace, I can likely cut that to 1-2" w/ led strips...