EB Gen 2 2ft help needed

Strip light questions and discussions go here (Samsung, Bridgelux, Photo Boost, Growcraft, etc.)
Forum rules
Post Reply
Shamz
LED-Curious
LED-Curious
Reactions:
Posts: 15
Joined: Sun Sep 01, 2019 8:15 pm

Hi All,

i have 20 x 2ft 3500k strips and a HLG-320H-42A driver. How would i wire this to get close to the maximum wattage?

Thanks in advance
Top
PeteR_1
LED Tinker
LED Tinker
Reactions:
Posts: 368
Joined: Sun Jul 05, 2020 1:10 am

Shamz wrote: ↑
Wed Sep 09, 2020 9:02 am
 Hi All,

i have 20 x 2ft 3500k strips and a HLG-320H-42A driver. How would i wire this to get close to the maximum wattage?

Thanks in advance
2 Series / 10 Parallel Circuit will get you the full Wattage (320+ Watts) from the HLG-320H-42A LED Driver (@ 21 - 42 Vdc).
Two (2) Bridgelux 560 mm Gen 2 wired in Series are 39 Vdc (19.5 Vdc each). Good Luck.

Typical Series / Parallel Wiring.
Typical Series / Parallel Wiring.

Bridgelux Gen2 Datasheets... https://www.bridgelux.com/sites/default ... ev%20A.pdf
HLG-320H-42A Datasheet... https://www.meanwell.com/Upload/PDF/HLG ... H-SPEC.PDF
Top
Post Reply

Return to “Strips”