Help with 4ft EB Series Gen3 High Output

Strip light questions and discussions go here (Samsung, Bridgelux, Photo Boost, Growcraft, etc.)
Forum rules
Post Reply
Wizard
LED-Curious
LED-Curious
Reactions:
Posts: 2
Joined: Tue Feb 16, 2021 1:26 am

Will I need a heat sink if I run BXEB-L1120Z-30E8000-C-D3 @1400ma?

Would it better to run double the Gen 2 series instead @ 700ma instead?
Last edited by Wizard on Tue Feb 16, 2021 2:26 am, edited 1 time in total.
Top
Ganjedi
LED-Curious
LED-Curious
Reactions:
Posts: 24
Joined: Wed Jul 29, 2020 11:55 am

Not knowledgeable enough to give you advice but just want to point out that the serial number you mentioned is a 2ft strip. I have gen3 2feet strips running at 750mA and they run pretty cool , I just used a cheap aluminum strip as heat sink and I can comfortably keep my hand on it and its just a little warmer than room temperature.
Top
Wizard
LED-Curious
LED-Curious
Reactions:
Posts: 2
Joined: Tue Feb 16, 2021 1:26 am

Thanks for pointing that out.
Top
Post Reply

Return to “Strips”